• Home
  • Eastwood Textured Rust Encapsulator Black Aerosol 15oz
Eastwood Textured Rust Encapsulator Black Aerosol 15oz is rated 4.8571 out of 5 by 7.
Rated 5 out of 5 by from Textured Rust Encapsulator I have a '98 Jeep TJ with a horrendous amount of frame rust that had to have Safe-T Cap work done to pass inspection (those are great too BTW). Anyhoo, I used this to convert/encapsulate rust and it was the easiest and most effective product I've ever used. If you have lots of rust and hate noxious chemicals, brushes, and black messy goop, buy this and don't look back. Cheers Eastwood! This product ROCKS!
Date published: 2014-07-17
Rated 5 out of 5 by from Eastwood Textured Rust I researched all different types of products from epoxies to bedlinners, to rustoleum for my 1968 mustang this product fit the bill. I sprayed multi light coats on the undercarriage and this went on great. Nice matt finish not to shinny like most products and a very light texture regardless of the amount of coats. i will start using this all the time i even had to touch up a spot which you can't even see once dried. Buy with confidence i have been painting cars for 14 years.
Date published: 2014-10-25
Rated 4 out of 5 by from Recommended Product appears to be good. covers good and dries fast. Easy to paint over.
Date published: 2013-12-05
Rated 5 out of 5 by from Nice product to use. Thoroughly cleaned wheel wells, then appiled the rust converter. Last used the Textured Rust Encapsulator which went on very easily. Pant mask is a good idea!. Took about a can per wheel well. Results were show quality, and I'm no painter!
Date published: 2014-05-18
Rated 5 out of 5 by from Seen this product..online and decided to try it!! I bought a used Ford Ranger XLT and after 4 years..showed the undercarriage was rusting! Seeing this...I didn't like what..it would look like...as time went on! Purchasing a can to try it...I was convinced..this was a way to go! I bought another thinking...I could finsh..what I started! I was wrong! After three cans...I must say..the job and what this product does after drying was a huge difference!! I'm sold!!
Date published: 2014-12-24
Rated 5 out of 5 by from eastwood textured rust emcapsulator black . great product it worked great for what i needed it for.
Date published: 2014-11-01
Rated 5 out of 5 by from durable finish I bought this product 2 weeks ago and happy so far. As far volume of product goes, I used 10 cans for 2 decent coats on a 16' double axle trailer I'm building, that's including wheel wells. It dries pretty hard and seems to be pretty durable. It just hasn't been long enough for me to tell how it keeps up to the elements and road salt. Also like that you can sand it and paint it. Only thing so far I don't like is that I did get any in my stocking this year. CHAD
Date published: 2015-01-15
  • 2015-04-25T12:12CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_14741Z, PRD, sort_relevancy
  • clientName_eastwood

Will this product help stop my hitch from rusting 

Asked by: Miller1236
Yes, the product is a rust treatment and prevention
Answered by: SeanA
Date published: 2015-04-17

I just had a new bumper built for my truck. Would this stuff be good to paint it with? Is it durable enough for a truck bumper?

Asked by: ChadV
It can be sprayed on any bare metal surface with or without rust. It's UV resistant, but it should be top coated for the best results when used on permanently exposed surfaces. It will be durable overall, but will not withstand repeated abrasion very well.
Answered by: MikeL
Date published: 2015-03-14

can your rubberized rust encapsulator be applied over this textured rust encapsulator?

Asked by: jo36
yes, it can be applied over top of it as long as properly prepped.
Answered by: SeanA
Date published: 2014-12-10

Can this be used on engine manifolds to treat rust & corrosion?

Asked by: Ruth
No any sort of manifold/header coating would need to be blasted before application. Also none of our rust treatments will go with that high of a temperature
Answered by: SeanA
Date published: 2014-12-10

Is the only difference between this product and product #16060 is that this has a textured surface? Thank you.

Asked by: KevinS
That is correct, the regular rust encapsulator will lay smooth, where the textured rust encapsulator, will have a textured surface.
Answered by: SeanA
Date published: 2014-10-08

The rocker panels on my 2003 caravan are rusting through in places. If I figerglassed in the worst areas-would your product work well if I used it to cover the entire rocker panels. Would your bedliner products be a better way to go.Thank you,

Asked by: Nevil
Technically with your rust issue (rusting through) I would recommend using our rust converter on the heaviest areas, followed by using our rust encpasulator. Instead of using bedliner you can also (in place of the regular rust encpasulator) use rubberized rust encapsulator.
Answered by: SeanA
Date published: 2014-11-28

Does this product have to be top coated?  I would like to use it on F150 rocker panels.

Asked by: Ekunz111
This, and other Rust Encapsulator products, are UV resistant and do not need to be top coated.
Answered by: NickC
Date published: 2014-12-06

IS THIS A FLAMMABLE INK? because I want to carry it in airline baggage.

Asked by: roy34
  • 2015-04-25T11:30CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_en_US, sid_14741Z, PRD, sort_recentAnswersFirst
  • clientName_eastwood

Eastwood Textured Rust Encapsulator Black Aerosol 15oz

Item #14741Z Brand: Eastwood

Apply a textured finish that stops—and hides—surface rust


Stop—and hide—rust in its tracks! Our "Textured" Rust Encapsulator stops surface rust, and hides it too!

Like our regular Rust Encapsulators, this textured formula seals and stops rust and corrosion from spreading, but it does more—apply it over rusted and surrounding clean metal and it turns it all into a textured surface that hides the rust!

Tested against well-known brands, the family of Eastwood Rust Encapsulators has proven to be superior in sunlight resistance, preventing rust creep, and overall durability. Twice the corrosion resistance of our original formula for greater durability (tested to 500 hours in a salt-spray chamber).

  • Textured formula hides the rust
  • Epoxy-fortified for better adhesion and topcoat compatibility
  • Penetrates deeper to prevent rust from spreading or forming, even in hard-to-reach areas
  • 15-oz. aerosol covers about 10-15 sq. ft.
  • As seen on "My Classic Car" TV show

More info...

About Eastwood Textured Rust Encapsulator Black Aerosol 15oz

Our latest "Textured Finish" Rust Encapsulator formula can be applied over rusted and clean metal to hide spotty surface rust by giving the whole area a textured finish! Eastwood's Rust Encapsulators have been tested by an independent lab to be among the most effective rust-preventive products yet. Rust Encapsulator is a great primer for floor pans and other underbody parts. It fills tiny pin-holes and surface irregularities, and is compatible with lacquer, enamel and urethane topcoats (including Eastwood Chassis Black). For the absolute ultimate rust remedy, first brush or spray-on Eastwood Rust Converter, then prime with Rust Encapsulator. One 15-oz. aerosol covers about 10-15 sq. ft., and contains no isocyanates. Heat-resistant up to 400 degreesF. Made in the USA.


15-oz. aerosol can of Textured Rust Encapsulator


PRE Painting Prep 10041Z, Rust Converter 51483Z, Internal Frame Coating 12515Z, respirator 11456


Use a wire brush to remove loose rust, scale and paint, and remove dust, grease and oil deposits. Feather surrounding paint with 220-grit sandpaper. Shake can for at least 2 minutes once the mixing ball starts to rattle. Hold the Textured Rust Encapsulator can 10"-12" above surface as you spray. A single coat dries to the touch in 20 minutes, and is thoroughly dry in 3-4 hours at 68 degreesF. For greater durability, a second coat can be applied 1 hour after the first. Allow 6-8 hours after the last coat before applying topcoat. Use over or under body fillers.


Work in a well-ventilated area when applying this product. The use of a respirator is recommended. Shake vigorously for 2 minutes before spraying. Consult MSDS for specific safety warnings.


Made in USA

Customers also viewed: