- Eastwood Textured Rust Encapsulator Black Aerosol 15oz
Eastwood Textured Rust Encapsulator Black Aerosol 15oz
Item #14741Z Brand: Eastwood
Stop—and hide—rust in its tracks! Our "Textured" Rust Encapsulator stops surface rust, and hides it too!
- Textured formula hides the rust
- Epoxy-fortified for better adhesion and topcoat compatibility
- Penetrates deeper to prevent rust from spreading or forming, even in hard-to-reach areas
- 15-oz. aerosol covers about 10-15 sq. ft.
- As seen on "My Classic Car" TV show
Like our regular Rust Encapsulators, this textured formula seals and stops rust and corrosion from spreading, but it does more—apply it over rusted and surrounding clean metal and it turns it all into a textured surface that hides the rust!
Tested against well-known brands, the family of Eastwood Rust Encapsulators has proven to be superior in sunlight resistance, preventing rust creep, and overall durability. Twice the corrosion resistance of our original formula for greater durability (tested to 500 hours in a salt-spray chamber).
About Eastwood Textured Rust Encapsulator Black Aerosol 15oz
Our latest "Textured Finish" Rust Encapsulator formula can be applied over rusted and clean metal to hide spotty surface rust by giving the whole area a textured finish! Eastwood's Rust Encapsulators have been tested by an independent lab to be among the most effective rust-preventive products yet. Rust Encapsulator is a great primer for floor pans and other underbody parts. It fills tiny pin-holes and surface irregularities, and is compatible with lacquer, enamel and urethane topcoats (including Eastwood Chassis Black). For the absolute ultimate rust remedy, first brush or spray-on Eastwood Rust Converter, then prime with Rust Encapsulator. One 15-oz. aerosol covers about 10-15 sq. ft., and contains no isocyanates. Heat-resistant up to 400 degreesF. Made in the USA.
15-oz. aerosol can of Textured Rust Encapsulator
Use a wire brush to remove loose rust, scale and paint, and remove dust, grease and oil deposits. Feather surrounding paint with 220-grit sandpaper. Shake can for at least 2 minutes once the mixing ball starts to rattle. Hold the Textured Rust Encapsulator can 10"-12" above surface as you spray. A single coat dries to the touch in 20 minutes, and is thoroughly dry in 3-4 hours at 68 degreesF. For greater durability, a second coat can be applied 1 hour after the first. Allow 6-8 hours after the last coat before applying topcoat. Use over or under body fillers.
Work in a well-ventilated area when applying this product. The use of a respirator is recommended. Shake vigorously for 2 minutes before spraying. Consult MSDS for specific safety warnings.
Made in USA
Customers also viewed:
High-grade patina preserving coat prevents further discoloration and protects surfaces from corrosion
Stop rust in its tracks!
Starting at: $14.89
Destroys rust hiding inside chassis, so it won't rust thru
Starting at: $16.89
Stops rust, and protects the underside of your car!
Starting at: $17.99
Transforms surface rust into a paintable surface!
Starting at: $12.79