- Underhood Black Quart Semi-Gloss
Underhood Black Quart Semi-Gloss
Item #10045ZP Brand: Eastwood
the OEM finish under the hood
- Exceptional adhesion for an engine-compartment paint
- Just degrease parts first for a factory-like semi-gloss finish
- 1-quart can covers 48 square feet
About Underhood Black Quart Semi-Gloss
Underhood Black is the correct shade of black, having just the right 10-20% semigloss finish most car manufacturers used on radiator supports, inner fender walls, lug wrenches, jack bases, underhood brackets, and other parts. Hardware store black paints are either too thick, too glossy, or the wrong color. Just clean, degrease, and prepare the parts well, then spray on for a "factory-like" finish. This acrylic lacquer withstands up to 250 degrees F and goes on thin for a satin smooth finish which does not hide surface details. One quart covers 48 square feet.
One Qt coverage: 50 Sq ft, Max temp 250F, Lacquer. To spray, thin 100%-150% with lacquer thinner.
We recommend PRE Painting Prep (10041 Z) to remove residual grease or oil before painting. Use Self-Etching Primer Aerosol (16014 Z) or Qt. (16009 ZP) on clean metal surfaces.
Made in the USA. 30 Day Eastwood Warranty. QUANTITY DISCOUNTS AVAILABLE FOR THIS ITEM
Use Underhood Black for the correct Satin Black finish found on inner fenders, fire wall, brackets and more, on many cars. Paint may be thinned 100-150% using Toluene or Lacquer thinner. For 100%: use 1 part paint and 1 part thinner. For 150%: use 2 parts paint and 3 parts thinner. Underhood Black produces a 10-20% gloss, and covers approx 50 sq ft. Use these products in a well ventilated area, or wear a respirator like our Pro Respirator (34029).