- Eastwood Urethane Clear 2:1 Gallon
Eastwood Urethane Clear 2:1 Gallon
Item #50250ZP Brand: Eastwood
Premium European resins in this Urethane Clearcoat produce excellent durability and UV resistance.
- Professional quality and performance
- Protected against UV, weathering
- 1-gallon can
Eastwood Euro Urethane Clear is a premium 2:1, high-solids clearcoat made from superior European resins. It dries fast, with a beautiful gloss and excellent DOI (depth of image).
About Eastwood Urethane Clear 2:1 Gallon
EW Euro Urethane Clear is a premium 2:1, high-solids clearcoat made from superior European resins. It dries fast, with a beautiful gloss and excellent DOI. Flows and l;evels easily with no shrinkage or dieback. Features excellent durability and long-lasting UV protection, weathering and everyday wear. Requires EW Urethane Activator 50252 ZP
Contains one US Gallon 128 FL oz
51604 EW Concours gun with 3 tips 51559 EW digital regulator 50040ZP Master paint Prep Kit 10194ZP PRE Paint Prep 20474 4-stage desicannt system 51561Z 6" Complete polishing-buffing system 43311 Dewalt professional buffer-polisher 2000 Grit sandpaper
Apply two medium coats, with a 10-minute flash time between each coat. Clear should be dry to the touch within 10 minutes, and tack-free in 3 hours, at 70°F. Additional coats may be applied after 8 hours, but before 18 hours. For maximum depth, cured coats may be wet-sanded with 2,000-grit abrasive and re-coated with one or two more clear coats. If you’re using an HVLP gun, use 1.3mm to 1.5mm tip at 8-10 psi; if using a conventional gun, use 1.3mm to 1.6mm tip at 45-50 psi.
always wear eye, skin and respiratory protection when painting. Follow MSDS and label safety instructions Always paint in a well ventilated area away from open flames. This is National Rule Compliant 4.2lbs of VOC, per gallon
Made in the USA
Apply two medium coats with a ten minute flash time between each coat. Clear should be dry to the touch within 10 minutes and tack-free in 3 hours at 70Â³F. Additional coats may be applied after 8 hours, but before 18 hours. For maximum depth cured coats may be wetsanded with 2000 grit and recoated with one or two more clear coats. If using HVLP gun use 1.3 to 1.5 tip at 8-10 psi If using conventional gun use 1.3 to 1.6 tip at 45-50 psi
Questions & Answers
Customers also viewed:
Our single-stage urethane coatings, plus exterior, in gloss, metallic, satinOnly $4.99