- EW Urethane Clear 2:1 Quart
can i mix flake with this clear coat
I was wanting to know if the EW eurathane clear can be applied over basecoat. I have a small job and no need for a gallon of one of the others.
Can this product be applied with a paint brush on rough wood to create a smooth surface?
Can this be used over your 2k high gloss rattle can product? I started a project with the rattle cans and they aren't providing enough coverage for the cost so I'm thinking of going over everything with this product.
After a bake cycle of 140 F for 40 min w/ appropriate cool down time, is this considered fully cured? Can it be handled and introduced to cold weather after bake cycle?
Can the clear coat be force dried? If so at what temperature and duration?
can this clear coat be used over stained wood
I want to use this on 2 guitars that I sprayed with nitrocellulose lacquer. And 1 with enamel. Is this the correct product or do you have something more compatible ?
EW Urethane Clear 2:1 Quart
Item #50251ZP Brand: Eastwood
Premium European resins in this Urethane Clearcoat produce excellent durability and UV resistance. This Clear requires the use of Eastwood 50252ZP Urethane Activator.
- Easy to spray flat, and even easier to polish
- Long-lasting protection from UV, chemicals and weathering
- High-solids content to build quickly and avoid shrink-back as it cures
Eastwood Euro Urethane Clear is a premium 2:1, high-solids clearcoat made from superior European resins. It dries fast, with a beautiful gloss and excellent DOI. Flows and levels easily with no shrinkage or dieback. Features excellent durability and long-lasting UV protection, weathering and everyday wear. Includes 2 quarts Eastwood Low VOC Activator. Mixes 2:1, 2 parts clear, 1 part activator.
About EW Urethane Clear 2:1 Quart
Thoroughly mix two parts 50250ZP HS Clear in gallons or 50251ZP HS Clear in quarts, with one part 50252ZP HS Clear Activator. For even better spray-ability, 2:1 mix may be reduced with a urethane-grade reducer or other appropriate solvent product. Doing this will improve the flow and leveling. Eastwood suggests using a Zero-VOC reducer to avoid potential compliance issues.
Use caution in mixing materials as HS Clear may begin to gel after approximately two hours (at 70 °F).
SPRAY GUN SETUP
HVLP Gun: Fluid Tip 1.3-1.5 mm Inlet Spray Pressure 25-30 psi
Conventional Gravity: Fluid Tip 1.3-1.6 mm Inlet Spray Pressure 45-50 psi
Conventional Siphon: Fluid Tip: 1.4-1.8 mm Inlet Spray Pressure 45-50 psi
Apply Eastwood HS Clear in two medium wet coats, with a 10-minute flash period be- tween each. Clear should be dry to the touch within 10 minutes, and will be tack-free within three hours (at 70 °F). Do not recoat between one and eight hours after previous coat. Additional coats may be applied after eight, but before 18 hours (at 70 °F) have passed from completion of previous coat. Ideal application temperature is between 70°F and 90°F.
For increased depth and gloss, well cured clear may be wet sanded and recoated with one to two additional wet coats.
Product Information Sheet
1-quart can of 2:1 European Urethane Clearcoat
This Clear requires the use of Eastwood 50252ZP Urethane Activator that is sold separate.
Always wear eye, skin and respiratory protection when painting. Follow MSDS and label safety instructions. Always paint in a well-ventilated area away from open flames. National Rule Compliant.
50252ZP Eastwood Urethane Euro Clear 2:1 Activator, Quart
51604 Eastwood Concours HVLP Gun with 2 tips
51559 Digital Regulator
50040ZP Master Paint Kit
20474 4-Stage Air Dryer System
10194ZP PRE Painting Prep 30 oz.
51561Z Liquid Ice Buffing System
43311 DeWalt® Variable-Speed Buffmaster Polisher
31355 2000-Grit Sandpaper, 50-pack
Questions & Answers
Customers also viewed:
Combines desiccant drying with built-in dirt and oil aerosol filtersOnly $29.99