- Eastwood 2:1 European Urethane Clear Gal and Activator
Eastwood 2:1 European Urethane Clear Gal and Activator
Item #51144ZP Brand: Eastwood
Eastwood European Urethane Clearcoat plus Activator System makes 1-1/2 gallons of premium clearcoat
- Easy to spray flat, and even easier to polish
- Long-lasting protection from UV, chemicals and weathering
- High-solids content to build quickly and avoid shrink-back as it cures
Eastwood Euro Urethane Clear is a premium 2:1, high-solids clearcoat made from superior European resins. It dries fast, with a beautiful gloss and excellent DOI. Flows and levels easily with no shrinkage or dieback. Features excellent durability and long-lasting UV protection, weathering and everyday wear. Includes 2 quarts Eastwood Low VOC Activator. Mixes 2:1, 2 parts clear, 1 part activator.
About Eastwood 2:1 European Urethane Clear Gal and Activator
Thoroughly mix two parts 50250ZP HS Clear in gallons or 50251ZP HS Clear in quarts, with one part 50252ZP HS Clear Activator. For even better spray-ability, 2:1 mix may be reduced with a urethane-grade reducer or other appropriate solvent product. Doing this will improve the flow and leveling. Eastwood suggests using a Zero-VOC reducer to avoid potential compliance issues.
Use caution in mixing materials as HS Clear may begin to gel after approximately two hours (at 70 °F).
SPRAY GUN SETUP
HVLP Gun: Fluid Tip 1.3-1.5 mm Inlet Spray Pressure 25-30 psi
Conventional Gravity: Fluid Tip 1.3-1.6 mm Inlet Spray Pressure 45-50 psi
Conventional Siphon: Fluid Tip: 1.4-1.8 mm Inlet Spray Pressure 45-50 psi
Apply Eastwood HS Clear in two medium wet coats, with a 10-minute flash period be- tween each. Clear should be dry to the touch within 10 minutes, and will be tack-free within three hours (at 70 °F). Do not recoat between one and eight hours after previous coat. Additional coats may be applied after eight, but before 18 hours (at 70 °F) have passed from completion of previous coat. Ideal application temperature is between 70°F and 90°F.
For increased depth and gloss, well cured clear may be wet sanded and recoated with one to two additional wet coats.
(1) Gallon 50250ZP Eastwood Urethane Clear
(2) Quarts 50252ZP Eastwood Urethane Clear 2:1 Activator
Makes 1.5 gallons of clear
paint guns, tape, masking paper, wet sanding products, paint suits, respirators, mixing cups
Product Information Sheet
Always wear eye, skin and respiratory protection when painting follow instructions on can label
made in USA
Customers also viewed:
Clear urethane midcoat formulated for superior suspension of pearl and metallic flakes$99.98
Eastwood 4:1 Premium Show Clear Kit 5 quarts 15351ZP$199.99
Complete professional quality HVLP paint & detail gun kit at a DIY price
Precision of a 2-component coating without the paint gun
2-component gray surfacer designed for overall jobsOnly $89.99
Dries fast, with a beautiful gloss, excellent DOIOnly $129.99
1:1 mixing gets you an easy-to-apply, long-lasting show-car finishOnly $94.99
UV-resistant European resins; beautiful gloss and excellent depth of imageOnly $31.99