• Home
  • Eastwood USA Bright White wo/Activator

Eastwood USA Bright White wo/Activator

Item #50223ZP

Premium acrylic urethane topcoat
for exceptional long-lasting beauty
Not for sale or use in California. Eastwood Paints are formulated to meet National Rule VOC regulations, check with your local and state guidelines as some areas may have stricter regulations than others.
Now available in a Low VOC formula that can ship to California, order item 13568ZP

Details

This paint must be catalyzed with the quart of Urethane Activator (21856ZP). For increased depth and gloss, and, easier color sanding and buffing Clearcoat with Eastwood Urethane Clear, 2:1 Gallon with 2 of (50252ZP) Eastwood Urethane Clear Coat Activator, Quart. Be sure to apply Urethane finishes over properly prepped surfaces. For best durability prime bare metal with 50244ZP Eastwood Epoxy Gray Primer Gallon mixed 1:1 with 50245ZP Eastwood Epoxy Primer Catalyst. Use the 50240ZP Eastwood 2K Urethane Gray Primer Gallon mixed 4:1 with 50241ZP Catalyst Quart to help hide minor defects.

About Eastwood USA Bright White wo/Activator

EW USA Bright White is a premium true acrylic urethane topcoat that provides exceptional long-lasting beauty and durability. This premium two component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and laquer coatings, a catalized urethane system offers unsurpassed durability and resistance to UV exposure, chemicals and annoying stone chips. Eastwood's line of paints will hold their gloss longer and won't yellow. 96 Fl. Oz 3:1 Single stage Topcoat system, requires 21856ZP activator


Application

Clean surfaces of all contaminants. Abrade surface to be painted with a minimum of 320 grit sandpaper working up to a 600 grit for maximum adhesion. Re-clean surface. After shaking paint, mix 3 parts paint with 1 part activator. Use caution mixing materials as paint may begin to gel after 2 hours at 70ø. HVLP gun setting 8-10psi 1.4-1.8mm tip. This color is designed to give complete coverage in 2-3 coats. Allow 10 minutes flash time between coats, should be tack free in 45-60 minutes, full cure in 18 hours.


Accessories

21856 ZP activator required. 50250 ZP Urethane Clear and 50251 ZP Activator 50240 ZP Urethane primer and 50241 ZP Activator 12817 Paint accessory kit, 19830 Respirator, 20406 coveralls 12454Z Block sanding kit, 20491 3-gun set 20472 Air managemnet system


MSDS Sheet

Click Here for Material Safety Data Sheet


Application

Clean surfaces of all contaminants. Abrade surface to be painted with a minimum of 320 grit sandpaper working up to a 600 grit for maximum adhesion. Re-clean surface. After shaking paint, mix 3 parts paint with 1 part activator. Use caution mixing materials as paint may begin to gel after 2 hours at 70Ö. HVLP gun setting 8-10psi 1.4-1.8mm tip. This color is designed to give complete coverage in 2-3 coats. Allow 10 minutes flash time between coats, should be tack free in 45-60 minutes, full cure in 18 hours.


Customers also viewed: