Item #
50104ZP
BRAND: Eastwood
Eastwood Universal Urethane Reducer Zero VOC - 32oz
Improves atomization and flow-out of our urethane paints, epoxy primers
Improves atomization and flow-out of our urethane paints, epoxy primers
Eastwood Universal Urethane Reducer Zero VOC - 32oz is rated
out of
5 by
21.
Improves atomization and flow-out of our urethane paints, epoxy primers
90 day Warranty Included
100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.
- • Lifetime Tech Support
Product Overview:
Description
Eastwood's Zero-VOC Universal Reducer improves atomization and flow-out
- Works with Eastwood Urethane Paints...
- Eastwood European Urethane Clears...
- Eastwood Gray or Black Epoxy Primers
- Zero VOCs
This reducer makes painting easier by improving atomization and flow-out of Eastwood urethane paints and epoxy primers.
In the Box
Contents
1-qt. can of Universal Urethane Reducer, Zero VOC
Guides & Accessories
Safety Information
Accessories
Reviews
Rated 5 out of
5
by
Johnk from
A little goes a long way.
I used this to slightly reduce my single stage urathane. Works great
Date published: 2023-06-05
Rated 5 out of
5
by
PdxPaulie from
mixed well, thinned well, clear laid well
I'm a full-on noob shooter, and got the reducer after reading online that the low VOC high-solid clear needed reducing. After mixing the clear and medium-speed activator 4:1, I added another 1.5 of reducer. It was prolly 80*, low humidity, no wind (yeah, shooting in an outside tent. I said I was a noob) day. Clear laid down well, cured to touch fast. I read complaints about guns clogging without the reducer. I had no such issues. Used a 1.4 tip. Killed the reducer before I finished the gallon of clear, but my job was finished anyway.
Date published: 2022-09-02
Rated 5 out of
5
by
Rid Studios from
Worked very well with my airbrush.
Really made a difference on the clear & the way it flows through the airbrush. Allows to apply thinner coats of clear.
Date published: 2021-10-21
Rated 4 out of
5
by
Ratking from
Eastwood universal urethane reducer zero voc
Had no issues with this reducer. It is a medium reducer though it’s not labeled. Worked well with my quarter mile candy red base coat.
Date published: 2022-08-05
Rated 1 out of
5
by
stevesxm from
they sent this instead of activator and told me " too bad"
they sent this instead of activator and told me " too bad"
Date published: 2023-05-25
Questions & Answers
Is this reduce rthe product I would use to thin/clean the 2K Urethane Primer/Surfacer? I need to know which so I can clean my spray gun when finished...
Reducer is for thinning paint. Lacquer thinner will clean you gun.
Date published: 2024-02-02
Will this work with a speedkote epoxy not just Eastwood?
I can only advise on Eastwood Products,
you' will have to try it, in order to be sure.
Date published: 2023-09-06
How much Urethane Reducer 50104ZP would you add to to an normal 2:1 mix of European clear 50251ZP with H/S Clear activator 502522ZP?
When adding reducer to a normally two part product. Less is better.
Add a small amount at a time. 5% Test spray, then add more if absolutely necessary.
You can always add, but cant remove.
20% maximum.
Date published: 2022-09-29
I have the roll on epoxy primer can i use the reducer to also make it a roll on sealer
We do not recommend reducing the Optiflow. The epoxy will act as a sealer even if not thinned.
Date published: 2021-12-06
Will this reducer work for your white epoxy primer?
Yes, this and any Eastwood urethane reducer we offer will work with our Epoxy primer formulas.
Date published: 2023-04-12
I have the roll on epoxy primer system. I am looking at this reducer to make it sprayable. Is this something that I can even do with that primer?
The Optiflow primers are designed to be rolled on and are not designed to be sprayed on. We have our standard Epoxy primers in quart and gallon kits that are intended to be sprayed.
Date published: 2021-11-30
How much do I need to reduce base coat if any at all
Technically, reducer is not requires with our 4:1 basecoats or our 3:1 SSU however it is strongly recommended. However, these can be reduced up to 20% with any of our Urethane reducers.
Date published: 2022-09-16
Whats the spray temp of this reducer? I can't find it listed but it's quite important information.
We apologize for the confusion. This would be a medium speed so ideal for between 70-80F.
Date published: 2021-08-03
Eastwood Universal Urethane Reducer Zero VOC - 32oz
$34.99
In Stock