- Eastwood Factory Gray Hi-Temp Coating
Eastwood Factory Gray Hi-Temp Coating
Item #10395 Factory Gray Hi-Temp Coating
manifolds, headers; protects to 1400°F
- Temperature resistant up to 1400 degrees
- Available in pints or aerosol
- Brush or spray-on application
About Eastwood Factory Gray Hi-Temp Coating
Now the same great 1400 degree performance of our original High Temp Manifold Coating is available in convenient aerosol packaging. Each can is sufficient to coat 2 standard cast iron manifolds or about 6 square feet. 2 cans recommended for header systems.
This pint of Factory Gray Coating replicates the look of cast iron on manifolds and headers. Easy brush-on application with the included disposable brushes or sprayable as is using our Pro Portable Sprayer (10387Z) or your jamb gun.
SAS Bandit Respirator
Eastwood PRE Painting Prep
Paint Mixing Cups 1QT
Devilbiss Prep Wipes
Painting Tack Rags
Devilbiss Dekups 24oz
Painters Masking Tape
Painters Masking Paper
Eastwood Air Injected Cleaner
Eastwood Scuff Pads
Detailing Kit Information
Factory Gray Exhaust Detailing Kit - 1 each of Factory Gray High Temp Coating (34105Z), Exhaust Paint aerosol (10020Z) and a Pack of 3 disposable foam brushes (34152). The pint of High Temp Coating provides enough material to cover one pair of exhaust headers or a few pairs of cast iron manifolds. One aerosol can of Silver Exhaust Paint covers about 6 square feet.
Contains Toluene 108-88-33 1, 1, 1, 2-Tectraflourethene (HFC-134A) 811-97-2, Stoddard Solvent 8052-41-3,Aluminum Flake 7429-90-5,Mineral Spirits 64742-88-7, Phenylpropyl Silsesquioxanes 68037-90-1,Toluene 108-88-3,Carbon Black1333-86-4. Keep away from heat, sparks & open flame. Use with adequate venting. Vapor is harmful. Harmful or fatal if swallowed. If swallowed, do not induce vomiting. Call a physician immediately.Avoid prolonged skin contact & breathing of vapor mist.Warning: This product contains a chemical known to the State of California to cause birth defects and other reproductive harm.
Questions & Answers
Customers also viewed:
Durability and precision of a 2-component coating, without the paint gunOnly $24.99
Durable, heavy-duty coating resists DOT 3 brake fluid; up to 400°F
Spray-on a protective, durable, aluminum-look finishOnly $15.49