• Home
  • Farecla Dry Guide Coat

Farecla Dry Guide Coat

Item #11723 Brand: Farecla

Detects and shows high and low spots, pinholes and scratches

Details

Farecla® Dry Guide Coat helps you easily find the high and low spots Easy-to-use, dry coat defect detection: just dab on with the dusting pad included, then sand until dust is gone...defects will appear.
  • Detects and shows you low spots, pinholes and scratches
  • Works in body fillers and primers
  • Contains no solvents

About Farecla Dry Guide Coat

Guide Dust from Farecla identifies pinholes and scratches in both body fillers and primers. Guide Dust is quick and simple to use and reduces the amount of solvents being used in your shop. No masking required.


Contents

3.5-oz. tub of Farecla® Dry Guide Coat


MSDS

Click Here for Material Safety Data Sheet


Instructions

For best results, follow these recommended steps:

1) Open the Guide Dust container, remove the foam applicator, and peel off the top label.
2) Ensuring all holes in the top are covered, place the foam applicator over the holes and turn the pot upside down.
3) At the same time twist the applicator in a circular motion to ensure even distribution of the Guide Dust onto the applicator.
4) Check to see if you have a good, even coverage on the applicator; if not, repeat above.
5) Apply Guide Dust to the repair area using a smooth circular motion. Check area for imperfections.


Customers also viewed: