• Home
  • Evercoat® Featherfill G2 Black Gallon
Evercoat® Featherfill G2 Black Gallon is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from Great product I've used this stuff for years. I use it on Black and other dark colors completely covering the vehicle and sanding off 95% or more but it leaves a wave free job. It does not lay down great but according to Evercoat it can be reduced up to 10% with acetone. I always seal before topcoat.
Date published: 2014-02-19
Rated 5 out of 5 by from I like it sprays nice, covers/fills well, sands well, only complaint is the mixing formula is a little hard to get use to at first.
Date published: 2013-04-03
  • y_2017, m_8, d_18, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_19783ZP, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_eastwood

Can a single stage urethane paint be put over top

Asked by: Tru47
Yes, you can apply Urethane paint directly over this surface...
Answered by: KHoffnagle
Date published: 2016-04-04

Can this be used over bare-metal

Asked by: Chuck I
All bare metal areas larger than one inch in diameter must be treated with a high quality self - etch or epoxy primer.
Answered by: Chuck I
Date published: 2016-03-04

can this be applyed over bare steel and fiberglass?

Asked by: bobby cartwright
It can be applied over properly prepped fiberglass. All bare metal areas larger than one inch in diameter must be treated with a high quality self-etch or epoxy primer.
Answered by: MikeL
Date published: 2014-11-19
  • y_2017, m_8, d_18, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_19783ZP, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Evercoat® Featherfill G2 Black Gallon

Item #19783ZP Brand: EverCoat

Need more filler over self-etching primers? Use FeatherFill® G2™

Out of stock

Only $77.99



Feather Fill G2 is a high solids polyester primer surfacer that is VOC compliant. It is specially designed to hold down body repair areas and provide an excellent foundation for any paint system. It has excellent adhesion to fiberglass, SMC, body filler and wood surfaces.

  • High Build Formula with minimal texture on surface
  • Excellent adhesion to fiberglass, SMC and wood
  • Fast Dry-to-Sand time reduces cycle time
  • Waterborne compatible and VOC compliant
  • MEKP Activator included

Many shops commonly apply self-etching primer to bare metal surfaces. But most polyester fillers and epoxy primers should not be applied directly over self-etching primers. So what do you apply when you need additional filling? Feather Fill G2 is the answer.

More info...

About Evercoat® Featherfill G2 Black Gallon

Rigid Plastics
Body Filler or Putty
Epoxy Primer
Self-Etch Primer (extends dry-to-sand time)

NOTE: All bare metal areas larger than one inch in diameter must be treated with a high quality self-etch or epoxy primer.

- Shake and stir thoroughly before mixing
- Add one tube (.75 fl. oz.) liquid hardener to one quart of Feather Fill or 2% by weight and mix thoroughly
- Pot Life is 35 minutes @ 75°F (24°C)
- Do not leave product in the spray gun for longer than 45 minutes

- Use a primer gun with a 1.7 to 2.2 fluid nozzle/air cap (Spray at paint gun manufacturer’s recommended air pressure)
- Apply 2-3 medium wet coats allowing 5-10 minutes flash time between coats

- Ready to sand in 75-90 minutes depending on film build
- Applying over self-etch primer could add 4-6 hours to the dry time
- Once dry sand Feather Fill with 400-600 grit sandpaper prior to next step


1 Gallon of Black FeatherFill®
4 Tubes of activator


Click Here for Data Sheet

Customer Reviews

Questions & Answers

Customers also viewed: