• Home
  • Firethorn Red Interior Paint Aerosol 12 oz Net
Firethorn Red Interior Paint Aerosol 12 oz Net is rated 3.0 out of 5 by 2.
Rated 2 out of 5 by from Not really meant to CHANGE color The manufacturer isn't very truthful with their product. They say it is good to renew or change color but I would have to say that the "change" part is a bit of a stretch. The company, Sem Products, says on their website that there is no dye in the product. Kind of hard to change a color without dye don't you think? There are also no product information or instructions on the can, just a link to their site and what document to look for. I would not suggest this product for changing any color. Only use this if it is your actual color and needs brightening up.
Date published: 2011-10-26
Rated 4 out of 5 by from vert good used on dodge truck seats, changed gray to red seats
Date published: 2012-11-11
  • 2015-04-27T08:47CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_11444Z, PRD, sort_relevancy
  • clientName_eastwood

Firethorn Red Interior Paint Aerosol 12 oz Net

Item #11444Z Brand: SEM

UV- and abrasion-resistant enough for vinyl tops; flexible enough for seats

Details

Renew or change the color of vinyl, leather, and plastic automotive interior and vinyl tops. Produces a coating that is flexible enough for seats. Abrasion and UV resistant enough for convertible and vinyl tops. Can even be used on carpets to freshen up the existing shade. This specially formulated coating matches FORD OEM specs for appearance, scuff resistance and overall durability. Each can covers about 6 square feet. For optimum results and adhesion use the (52366Z) Adhesion Promoter Aerosol before applying color. Colors shown are approximate.

More info...

About Firethorn Red Interior Paint Aerosol 12 oz Net

Restore or change the color of plastic, vinyl, carpet, and velours. Produces a coating that is flexible enough for seats. Abrasion and UV resistant enough for convertible and vinyl tops. Can even be used on carpets to freshen up the existing shade. This specially formulated elastomeric coating matches many OEM specs for appearance, scuff resistance and overall durability. Each can covers about 6 square feet. For optimum results and adhesion use the (52366Z) Adhesion Promoter Aerosol before applying color. Colors shown are approximate.


Contents

Aerosol net weight 12oz


Accessories

52366z Vinyl Adhesion Promoter 52056z Plastic and leather adhesion promoter 52354 5-PC Door Panel tool set 43459 Nylon pry tool set


Safety

Always wear eye, skin and respiratory protection when painting. Always paint in a well ventilated area away from open flame.


Warranty

Made in USA QUANTITY DISCOUNTS AVAILABLE FOR THIS ITEM


Application

For best results, use when can is 70°F. Clean surface with warm soap and water. Ensure surface is dry before painting. Hold can approximately 6-8” from the surface to be coated. Apply light “mist” coats allowing 5-10 minutes between coats. Several thin coats give a better finish than one heavy coat. Carpet and Velour: Spray one light mist coat and immediately brush in all all directions using a nylon bristle brush. Apply a second light mist coat and brush again.


Customers also viewed: