• Home
  • Flanger/Punch Tool Pneumatic 7/32in
Flanger/Punch Tool Pneumatic 7/32in is rated 5.0 out of 5 by 3.
Rated 5 out of 5 by from good I have only tried this on a peice of scrap sheetmetal that I cut from a door skin.It worked well to punch holes and make flanges on the metal.It was metal from a 1946 truck whitch is heavier than on todays cars.I would buy again If I needed it.
Date published: 2013-05-08
Rated 5 out of 5 by from above average Have used it already. Very pleased with results.
Date published: 2014-05-06
Rated 5 out of 5 by from Flanger/Punch Tool Pneumatic 7/32" The tool is just what I needed and, did the job as I needed.
Date published: 2015-12-22
  • y_2017, m_4, d_22, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_31015, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_eastwood

I need to order replacement punch's for the 31015 flanger/punch tool. What is the part number so I can get them ordered?

Asked by: MustangDad
Unfortunately there are no replacement parts available for this item. We apologize for the inconvenience.
Answered by: KHoffnagle
Date published: 2016-08-26

Can I control when to punch a hole? Or does itbpunch a hole every time it closes to make the flange?

Asked by: dragracer
You can control when the unit punches. There is a lever that you depress to activate the unit.
Answered by: S Church
Date published: 2016-03-28

Maybe a dumb question, what is a flanger and will it punch holes in a 1960's British car sheet metal?

Asked by: 4Mee
A flanger puts an offset flange in the metal, so that you can lap weld a replacement panel with the repair panel sitting flush. It will flange panels up to 20 gauge and will punch holes in panels up to 14 gauge.
Answered by: NickC
Date published: 2017-03-25

Hello,      What gage metal is .040 ? Will this tool flange and punch 16 gage panels?      Thank you

Asked by: Thunder
.040 is between 19 and 20 gauge metal. This tool will flange metal up to 20 gauge and will punch metal up to 14 gauge.
Answered by: NickC
Date published: 2015-12-30

Does this tool require oil lubrication ? If so, how does one accomplish this ?

Asked by: Carguy
This tool does require oil lubrication. A few drops in the air inlet at each use will ensure the tool is lubricated.
Answered by: NickC
Date published: 2015-12-30
  • y_2017, m_4, d_21, h_23CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_31015, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Flanger/Punch Tool Pneumatic 7/32in

Item #31015 Brand: Eastwood

Produces 0.040" offset flanges and
punches 7/32"-dia. holes

In stock

Only $89.99

Sale $82.97



It's a Flanger, and a 7/32" Punch, in one handy pneumatic tool

  • Produce 0.040" offset flanges
  • Punch 7/32" diameter holes
  • Requires 4 cfm at 90 psi

Double-action head swivels to let you create flanges and holes from any angle with just a squeeze of the handle.

More info...

About Flanger/Punch Tool Pneumatic 7/32in

2-in-1 pneumatic tool saves space in your metalworking toolbox! One side of the double-action head produces 0.040" offset flanges on 20-gauge metal or thinner for clean welding with little grinding. The other side produces perfectly clean 7/32"-diameter holes that are ideal for plug welding; punches holes 1/4" from the panel edge in up to 14-gauge. Unique swivel-head design lets you work from almost any angle.


The Pneumatic Flange and Punch Tool produces a 0.040" offset flange for flush repairs up to 20-gauge, or punches clean 7/32" holes in up to 14-gauge steel. Requires 4 cfm at 90 psi. NOTE: The center of the hole produced is 1/4" from the panel edge.


20560 Straight Pneumatic Flanger-Punch Tool for 5/16" (8mm) holes

Customer Reviews

Questions & Answers

Customers also viewed: