• Home
  • Flexible Sealer and Sound Deadener 16 oz Aero

    Flexible Sealer and Sound Deadener 16 oz Aero

    Item #12742Z Brand: Eastwood

    Flexible, UV-resistant spray for
    in/out sealing, sound-deadening

    Details

    Eastwood's Flexible Sound Deadener is a unique high-build flexible coating that has an unlimited number of uses. Its no-crack flexible properties and UV resistance make it ideal for both inside and outdoor protection and sealing. Its high-solids content makes it a great sound deadener and it will easily fill small cracks and holes. Other uses include trunk liner, battery tray protectant bumper cladding and trim restoration. Will seal out moisture, prevent corrosion and can even be used as a concrete & asphalt sealer. EW's Flexible Sealer bonds to metals, wood, concrete, asphalt, PVC and plastics.

    Use the Eastwood aerosol wand (12512) to get into hard to reach places such as inner door frames. Available in a money-saving kit with application hose (22742Z).

    About Flexible Sealer and Sound Deadener 16 oz Aero

    Eastwood's Flexible Sound Deadener is a unique high-build flexible coating that has an unlimited number of uses. Its no-crack flexible properties and UV resistance make it ideal for both inside and outdoor protection and sealing. Its high-solids content makes it a great sound deadener and it will easily fill small cracks and holes. Other uses include trunk liner, battery tray protectant bumper cladding and trim restoration. Will seal out moisture, prevent corrosion and can even be used as a concrete & asphalt sealer. EW's Flexible Sealer bonds to metals, wood, concrete, asphalt, PVC and plastics.


    Contents

    16 oz Aerosol


    Accessories

    PRE Paint Prep 10041 Z


    Safety

    Always use in a well ventilated area. Always wear eye, skin and respiratory protection. Consult MSDS for specific safety instructions and warnings.


    Warranty

    Made in USA


    Application

    For best results, use at 60³F or above. Clean surface with PRE to ensure it is clean and free of debris. Hold can 10-12 inches from surface and apply thin even coats. Will be dry to the touch in 1-2 hours depending on conditions. Allow 24 hours for full cure. Good from -30 degrees F to 200 degrees F.


    Customers also viewed: