- Gator Guard II Truck Bed Liner Kit
Gator Guard II Truck Bed Liner Kit
Item #10129Z Brand: Gator Guard
- 2-part epoxy formula
- Just spray, brush or roll on
- 1 kit covers 32 sq. ft.
About Gator Guard II Truck Bed Liner Kit
The tough durable coating that seals and protects! Increase resale value, reduce maintenance and add a detailed look. Drop in liners can warp and trap water and contaminants that lead to bed corrosion. This two part epoxy is easy to apply with a wide brush, roller or sprayed with Undercoating Gun (16030A). Cured finish is flexible at low temperatures, offers a non-skid chip resistant finish. Adheres to firmly adhering paint or bare metal. Degrease area to be coated and mask. One kit covers 32 square feet. Most truck beds require 2 kits. 2 or more kits are available at a discounted price.
Each Truck Bed Liner Kit includes one container each of parts "A" and "B", a total of 1.7 liters or enough to cover the bed of a small truck. For larger trucks or heavier coats buy 2 kits.
At 72 degrees F surface will remain tacky for 7 hours. After 48 hours surface will have no product transfer and may be used for heavy loads. Do not wash surface with soap, water, or any other solvents for a minimum of 2 days after application.
Made in Canada. QUANTITY DISCOUNTS AVAILABLE FOR THIS ITEM
This coating is appropriate for all surfaces except polyethylene and similar plastics. Lightly scuff to roughen surface before coating. Make sure surface is free of any grease or oil. Mix equal parts of A and B thoroughly. Brush or roll mixed material at a 5-10 mil thickness. For spray application using a shutz type gun, apply a medium-wet coat at 35-65 psi. Immediately clean off any overspray and applicator with mineral spirits or paint thinner. Works best between 65 and 95 degrees F. One kit coats 32 sq.ft. with a 5-10 mill coat.
Customers also viewed:
Removes silicone, wax, polish, grease; promotes paint/powder adhesion
Loosens "frozen" metal parts; silicone protects against future rustOnly $29.99