• Home
  • Gravity-Feed Paint Gun Stand
Gravity-Feed Paint Gun Stand is rated 4.2 out of 5 by 15.
Rated 2 out of 5 by from Not what I had hoped for This stand comes in two pieces and the upper piece has a female (hollow) bottom that simply slides over the vertical rod of the lower peice. It is not a tight fit and the upper peice is loose and swings from side to side. This is easy enough to fix with a tack weld or a hammer, but unfortuneatly the geometery doesn't macth well with my very popular style of DeVILBISS paint gun. Nothing a good hobbyist can't modify pretty quickly but honestly there isn't enough material supplied to lengthen it the way it should be. To add to my dismay the shipment came a few days after I needed it for a project. It shipped with another item but I had no idea that either item wouldn't ship right away when I ordered them. It was my understanding that they were both in stock.
Date published: 2010-07-24
Rated 4 out of 5 by from Does the job for me My paint work is occasional, and the largest gun I use is a new-ish DeVilbiss gravity feed with an add-on regulator at the grip. I drive a #6 hex head sheet metal screw thru the provided hole on the stand's base to affix it to my temporary table and it's ready to go. A C-clamp would also work. When I'm done, it breaks down just as fast. By placing the stand at the edge of the table, I can set the gun on the stand with the air hose still attached. The Paint Gun Stand is a good product.
Date published: 2010-11-26
Rated 5 out of 5 by from Improvments I made a base to screw it to and added a spacer to hold the handle out so the cup would aligned with the strainer holder.I put wire heat shrink over the cup support bars.Rubber tubing would also work. I have seen the paint cup get all scraped up on the bottom . You need to grind the burrs off the ends of the steel rods in the gap where you set the cup into the support They are sharp and will damage the cup. I had to have a nice holder for my new Iwata!
Date published: 2012-05-22
Rated 5 out of 5 by from Gun holder I made a base to screw it to and added a spacer to hold the handle out so the cup would aligned with the strainer holder.I put wire heat shrink over the cup support bars.Rubber tubing would also work. I have seen the paint cup get all scraped up on the bottom . You need to grind the burrs off the ends of the steel rods in the gap where you set the cup into the support They are sharp and will damage the cup. I had to have a nice holder for my new Iwata!
Date published: 2012-05-22
Rated 5 out of 5 by from Nice Stand! I bought this stand for a project I am doing. It works great and is well built. I like the swing out top piece. a nice feature when you are done straining the paint. Just a gentile nudge and it move right out of the way. Holds the gun nice and secure. Great product. Held in place with a "C" clamp for now until I can find a permanent place to mount it.
Date published: 2014-12-16
Rated 5 out of 5 by from Outstanding product and value Lightweight, yet, sturdy, this product is practical and easy to assemble. It also allows easy attachment to any portable cart or permanent bench. Great value that make my work much easier
Date published: 2010-03-18
Rated 5 out of 5 by from Gravity-Feed Paint Gun Stand Does what it is advertised to do. I did not see any of the quality issues others mentioned. I will probably add a set screw to keep the top part from turning.
Date published: 2014-12-01
Rated 1 out of 5 by from Don't Bother Only thing I've ever bought from Eastwood that was not worth the effort. Poorly made; porous 'weld' broke in days. Make your own and be happier.
Date published: 2011-08-11
  • 2015-03-29T09:54CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_15
  • loc_en_US, sid_34008, PRD, sort_relevancy
  • clientName_eastwood

Gravity-Feed Paint Gun Stand

Item #34008

Holds your spray gun when you need to put it down or for filling

 

Details

Handy Stand holds your gravity-feed spray gun when you need to put it down or for filling You can't just lay a full spray gun down on its side when you need to stop your work for a while, so use this convenient stand to hold your gravity-feed spray gun upright. Place your filter/strainer in the top ring for easy filling.
  • Powder-coated steel construction
  • May be mounted to wall or on benchtop
  • Strainer and spray gun not included


Do you have a product idea? Click Here to suggest it!

More info...

About Gravity-Feed Paint Gun Stand

The Eastwood Gravity Paint Gun Stand holds both the gun and filter for easy filling or storage. Durable powder-coated steel construction makes clean-up easy.


Customers also viewed: