• Home
  • High Capacity Tubing Bender
High Capacity Tubing Bender is rated 3.8 out of 5 by 4.
Rated 4 out of 5 by from overall good bender good bender for the price. as compared to more expensive benders, you can see where this one is more economy, but it bends just the same. the die needs a little work to get the tool marks from transferring to the tubing though. i had to use a sanding wheel and cratex to smooth them out. the follower die also needed some light sanding on the edges.
Date published: 2016-11-22
Rated 5 out of 5 by from very well constructed The leverage action makes it very to bend 1.5 inch .100 wall tubing A little tricky getting tubing out of the die. but a heavy duty C-clamp solved the problem.
Date published: 2016-07-28
Rated 4 out of 5 by from Good product Bender is great. I've been using it for 1" DOM and it's been flawless thus far. I have to say that the assembly instructions are worse than IKEA. The worst instructions I've ever seen. Other than that I love my bender.
Date published: 2017-05-11
  • y_2017, m_11, d_24, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_21115, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_eastwood

whats the thickest wall 2" DOM it will bend? Will it bend to 90 degrees without crimping the pipe?

Asked by: kottunmewth
Fill tubing with sand and duct tape ends shut, That will help to cut down the possibility of crimping a great deal.
Answered by: Mindless Maurader
Date published: 2017-11-18

Can it bend square tubing? If so , up to what size?

Asked by: Missy
This unit cannot bend any square tubing.
Answered by: Scott C
Date published: 2017-11-13

does this bender come with one set of dies like jacks tools ?

Asked by: carl1954
This tool does not include a die. This allows you to pick the exact size you wish.
Answered by: S Church
Date published: 2017-09-25

Does the tube bender come with 1 die set

Asked by: Big D 94
The dies are purchased separately from the bender.
Answered by: S Church
Date published: 2017-11-01

I need to. It an inexpensive but dependably bender to bend several  1" OD 24ga round tubing into a 53"x58" rectangles every week. Is this bender made to do this project?

Asked by: Justjeepnstuff
This bender cannot make any rectangles since it bends around the die.
Answered by: S Church
Date published: 2017-08-26

What is the minimum wall thickness on a 2" tube that can be bent without crushing the tube?...I want to use .065 tubing (exhaust pipe). Any help would be great....thank you.

Asked by: I80 Metal Works
Minimum thickness should not be an issue as this draws the tubing over a die to avoid crushing. Just make sure your tubing is 2 inch Outside diameter. If it is larger it will crush since it doesn't fit correctly.
Answered by: S Church
Date published: 2017-08-07

WHO and WHERE is it made? Sure looks like a made in Tennessee version.

Asked by: TomTerrific
This bender is our brand- was designed here in house in PA but manufactured overseas in China for us.
Answered by: KHoffnagle
Date published: 2017-11-01

Does this bender use pro tools, jd2, or proprietary dies

Asked by: Homelessrdp
It looks like Woodward fab dies would work. But not interchangeable with the jd2 model 3. 
Answered by: Jsapienz
Date published: 2017-09-17
  • y_2017, m_11, d_24, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_14
  • loc_en_US, sid_21115, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

High Capacity Tubing Bender

Item #21115 Brand: Eastwood

Create accurate, smooth, kink-free bends up to 180°

In stock

Only $249.99

Sale $224.97



The Eastwood High-Capacity Tubing Bender is a serious metal shop tool capable of creating accurate, smooth, kink-free bends up to 180° in aluminum, steel, stainless steel and copper tubing, in sizes ranging from 3/4” to 2” with available Eastwood Die Sets.

  • Form bends in up to 0.120” wall tubing
  • Range of 11 available 120° and 240° dies for 3/4” to 2” diameter tubing
  • Handles aluminum, copper, steel, stainless steel and chromoly with ease
  • Constructed of 0.60” and 0.45” solid steel plate for maximum strength
  • Easy to store when not in use

Build roll bars, shop fixtures, go-kart frames and much more with high accuracy and professional results. We have added engineering details like solid brass bushings and a 5/8” steel frame to make sure it lasts for years.

More info...

About High Capacity Tubing Bender

The Eastwood High Capacity Tubing Bender is capable of bending tubing from ¾ Inch to 2 Inch OD of .120 Inch wall. Build anything from Headers a Roll Cage to a tube bumper with ease. Made to last with 0.60 Inch and 0.45 Inch steel plate. Degree ring and pointer included. Optional stand and 3 foot detachable handle for easy storage and setup. 11 different sized dies available.


Tubing Bender


Click here for product instructions


Keep fingers and hands away from moving parts while operating this tool. Always wear proper hand foot and eye protection when bending tubing.


1 year warranty china

Customer Reviews

Questions & Answers

Customers also viewed: