HIGH-TEMP CALIPER PAINT

    Eastwood’s innovative urethane caliper paints are the caliper coatings on the market to use nano-ceramic technology. These durable paints resist heat to 650°F. Road grime, brake dust wipe off easily. Also resists UV and most chemicals. These advanced direct-to-metal paints are easy to apply, either by spray or brush.

    11838Z Red Caliper Paint Coating Kit
    11839Z Black Caliper Paint Coating Kit
    11840Z Silver Metallic Caliper Coating Kit

    Kits feature one pint (16-fluid ounces) of Ceramic Caliper Paint, one aerosol can of PRE Paint Prep, three poly foam brushes and one quart-sized plastic mixing cup with lid.

    SAFETY
    This product was designed for and is intended solely for use by trained professionals. Read all warning statements and heed all recommended safety precautions before proceeding.

    DO NOT USE THIS SYSTEM WITHOUT SUFFICIENT VENTILATION. Users must wear appropriate, properly fitted NIOSH-approved activated charcoal cartridge respirator if a forced fresh-air system is not available. Always wear eye and face protection, as well as gloves and protective clothing. Do not use this product, or be exposed to spray mist / vapors if you have respiratory problems. See Material Safety Data Sheet for more complete safety information. KEEP OUT OF REACH OF CHILDREN AND PETS.

    This product may be mixed with other components. Once mixed, this system will have hazards of all components. Read warnings on all packages before opening.

     

    SURFACE PREPARATIONS
    Prepare surface to be painted by cleaning and ensuring it is free of debris, greases, oils and corrosion using Eastwood’s PRE(10041Z or 10194ZP). Once sufficiently cleaned, abrade all surfaces to be coated for adhesion purposes, then reclean to remove all sanding debris and any other surface contaminants which may remain.

     

    MIXING RATIO
    Eastwood’s High-Temp Ceramic Caliper Paints are packaged ready for use. For further improved sprayability, flow and leveling (especially in warmer temperatures), paint may be reduced by up to 10% with a high-quality urethane-grade reducer.

    For even greater durability and chemical resistance with a faster dry time and throughcure, blend High-Temp Ceramic Caliper Paint with Eastwood’s 4:1 Urethane Activator (21845ZP). Mix four parts Caliper Paint to one part Activator and stir well.

    NOTE: Due to the density of the ceramic nano-particles, can should be shaken and stirred well before using.

     

    APPLICATION INSTRUCTIONS
    High-Temp Ceramic Caliper Paint may be spray applied, or brushed onto the surface.

    Apply in two medium wet coats, waiting at least 20 minutes between coats. If waiting more than four hours between coats, then wait at least 24 hours prior to recoating. If the optional activator was used and more than 24 hours have passed since previous coat was applied, surface must be scuffed prior to application of a new coat. Ideal painting conditions are low humidity and surface temperatures of 70°F. Curing times will vary depending on temperature, humidity, and the use of optional Urethane Activator.

    DO NOT APPLY IF ANY BRAKE PARTS ARE WARM TO THE TOUCH.

     

    CLEANUP
    Make sure all containers are sealed tightly immediately after each use. Gun and equipment may be cleaned with a Gun Wash or other appropriate solvent.

     

    MORE INFO
    The Eastwood Company
    263 Shoemaker Road
    Pottstown, PA 19464
    Toll free: (800) 343-1178
    Fax: (610) 323-6269
    www.eastwood.com