- Elite HotCoat Powder Coating Kit
Elite HotCoat Powder Coating Kit
4 std. colors plus black and more
- Extremely durable finish
- Coat and cure in under an hour!
- Easy to apply
- Quick color changes
About Elite HotCoat Powder Coating Kit
Why powder coat? Because it gives you one of the most economical, color-durable, and longest-lasting finishes available. You'll find powder-coated surfaces are far more resistant to chipping, scratches, fading, and wear than other finishes, and the color selection is virtually unlimited, with high and low gloss, metallic, and clear finishes available. And thanks to the UV resistance of many of the powders, colors stay bright and vibrant longer. Texture selections range from smooth surfaces to a wrinkled or matte finish, plus rough textures designed for hiding surface imperfections.
One 8-oz. bottle of powder covers the same area as 2-3 cans of spray paint, and clean-up is easy, since you can simply sweep-up the oversprayed powder. Contains no environmentally harmful solvents. HotCoat Powder Coating System requires a 5-10psi compressed air source and dedicated electric oven (or toaster oven).
(See "Contents" tab for all the specific items included in this Elite kit.)
10198 Original Eastwood HotCoat Gun
1/2-lb. Black Gloss Powder
Your choice of 4 standard 1/2-lb. Powder Colors
51558 Powder Chip Color Chart
10078 Reusable Hi-Temp Silicone Plugs
10027 Hi-Temp Masking Tape (1/2" x 36-yard roll)
43045 1-lb. Stainless Steel Hanging Wire
34066 In-Line Air Filter
3 Empty Powder Bottles with Screw-On Tops
Beginning Powder Coater's Handbook
10041Z PRE Painting Prep
51081 Metal Wash Metal Prep
19418ZP Fast Etch Rust Remover and Metal Prep
20473 2-Stage Air Dryer System
58111 Pack of 20 Hooks
58112 Silicone Cap & Plug Kit
11477 Infrared Thermometer
10590 Infrared Curing Lamp
(Q) Can I use my household oven?
(A) No, you cannot use an oven that will be used to cook/bake food.
(Q) How long do I bake/cure the part?
(A) 20 minutes at 400 degreesF.
(Q) Can I remove the powder coating?
(A) Yes, use Eastwood's 12849 Powder Coat & Paint Dissolver (Qt.) or 12850 Powder Coat & Paint Dissolver (Gal.).
(Q) How do I know what the colors will look like?
(A) Order Eastwood's 51558 HotCoat Powder Coating Chip Chart (free in our kits).
Use a disposable dust mask when handling or applying powder. Powder, like common flour, can be explosive when suspended in the air in high concentrations. To minimize any explosion risk, sweep up—do not vacuum—powder from the floor. Cure powder in a well-ventilated area. The urethane powders we sell liberate a very minute amount of isocyanates when the powder flows out. This usually occurs about 3-5 minutes after the part is placed in the oven to bake. Wear a respirator with fresh filter cartridges when curing or inspecting flow-out progress.
1-year mfr's. warranty against defects.
Designed, engineered and tested to Eastwood's specifications.
Final product imported.
Customers also viewed:
Includes dual-voltage powder-coat gun and infrared curing lamp systemOnly $529.99
Both of our HotCoat guns for every size of powder-coating projectOnly $242.99
Dual-Voltage HotCoat gun, 4 standard colors plus black and more$259.99
Kit includes our Dual-Voltage Gun, gloss black powder and more!Only $209.99
"Deluxe" HotCoat Powder-Coating Kit includes our original HotCoat gun, making this the perfect starter kit!$149.99