- Hotcoat Powder Appliance White 8 oz
Hotcoat Powder Appliance White 8 oz
Item #100 10225
finish; coat and cure in under an hour
Place part in oven preheated to 450 degrees F and turn down to 400 degrees F after powder flows out. Leave oven at 400 degrees F for an additional 20 minutes to complete the cure.
Packed in 8 oz. net weight cans. Coverage is equivalent to 2-3 aerosol cans (appromately 10-20 sq. ft.).
Click here to see customer-submitted photos of our powder on their parts.
About Hotcoat Powder Appliance White 8 oz
HotCoat powders are exclusively formulated for this system. They are optimized to promote static charge for uniform coverage and finish. All are UV and fuel resistant. Packed in 8 oz. net weight cans. Coverage is equivalent to 2-3 aerosol cans (appromately 10-20 sq. ft.).
One 8 oz net wt. can, enough powder to cover 10-20 sq.feet. This is a polyester powder.
Customers also viewed:
Removes silicone, wax, polish, grease; promotes paint/powder adhesion
Silicone tape creates fine parting lines; removes without residueOnly $59.99