• Home
  • HotCoat Powder Black Diamond Metallic 10 Pound

HotCoat Powder Black Diamond Metallic 10 Pound

Item #1411610LBS

HotCoat Powder Black Diamond Metallic 10 Pound

Details

All Eastwood powders are virgin TGIC Chemistry and packaged in air tight reusable plastic containers. This polyester powder is cured at 400 degrees F for 20 minutes. 10lbs covers up to 200 sq. ft.

More info...

About HotCoat Powder Black Diamond Metallic 10 Pound

All Eastwood powders are virgin TGIC Chemistry and packaged in air tight reusable plastic containers. This polyester powder is cured at 400 degrees F for 20 minutes10lbs covers up to 200 sq. ft.


Contents

ten pounds net weight


Accessories

19415ZP Fast Etch Quart, 12725zp Powder Stripper Quart, 12582ZP Anodize remover Quart, 10421 High Temp Tape Kit, 13266 Magnetic Masking Discs, 58112 250pc Cap & Plug Kit, 10288z High Temp Lab Metal, 10590 two head curing lamp


Safety

always wear eye, skin and respiratory protection when powder coating. Do not cure in an oven that will cook food. Use in a well ventilated area. Do not use a houselhold vacuum or shop vac to clean up powder, the elctric motor could spark and ingnite the powder.


Application

Ensure metal parts are clean and free of all greases and oils. Apply powder using the Eastwood Powder Gun. Cure at 400 degrees F for 20 minutes. More detailed instructions are available at Eastwood.com