- Hotcoat Powder Factory Gray Hi-Temp 25 lb
Hotcoat Powder Factory Gray Hi-Temp 25 lb
finish; coat and cure in under an hour
About Hotcoat Powder Factory Gray Hi-Temp 25 lb
At Last! High temperature powder for header and exhaust manifold applications! We're pleased to present this range of 4 High Temperature Exhaust System coatings similar in color to our popular liquid high temp coatings. These high silicone content powders withstand temperatures up to 1000 degrees F and offer superior durability when compared to brush and spray-on coatings. Must be applied to clean bare metal. For best results abrasive blast and spray with PRE Painting Prep (10041Z) or acetone. Do not use over surfaces pretreated with any product that leaves a phosphate coating like Fast Etch or Metal Wash.
One 25lb. bag will cover approximately 500 square feet.
Use PRE Painting Prep (10041z) to remove residual grease or oil before powder application.
This powder has a high silicone content. Thoroughly blow out cup and gun with compressed air to assure that all silicone powder has been removed.