• Home
  • HotCoat Powder Metallic Red

HotCoat Powder Metallic Red

Item #11817 Metallic Red

Extremely durable, chip-resistant finish; coat and cure in under an hour

In stock

  1. Powder Metallic Red 8 Oz
    Item #11817
    Only $18.19

    In stock

  2. Powder Starlight Red 1 Lb
    Item #11817LB
    Only $24.29

    In stock

  3. Powder Metallic Red 25 Lb
    Item #1181725LBS
    Only $554.99
  4. Powder Metallic Red 50 Lb
    Item #1181750LBS
    Only $999.99


Do The Job Right with Eastwood Powders!

  • Provides extremely durable finish
  • Contains no environmentally harmful solvents
  • 100% Virgin powder
  • Impact resistant and flexibility
  • Good chemical resistance

Eastwood Powders are far superior to liquid coatings. They provide an extremely durable finish that is chip resistant. All Powders are formulated of the highest quality materials and are chemical and fuel resistant. Eastwood Powders are durable enough for under hood applications and heat resistant up to 250 degrees F. They are suitable for any metal surface and most cure at a temperature of 400 degrees F at 20 minutes after flow out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.

Metallic Red Powder HotCoat Single Stage Starlight Powder - This one step powder produces a deep, exciting Medium Red high gloss finish with special fine metallic sparkle flakes. Polyester formulation. Cure at 350-400ºF for 20 minutes after flow-out occurs.

More info...


8 Ounce powders are packaged in plastic bottles
1 Pound powders are packaged in plastic Bags


Color: Red Metallic
Gloss Level: Gloss 90+
Cure Temperature: 400 Degrees
Cure Time: 20 Minutes after flowout
Powder Type: Polyester
Finish: Smooth
Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.


When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.


Eastwood 100% satisfaction guarantee


CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.

COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11676.

CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.

Customer Reviews

Questions & Answers

Customers also viewed: