Daily Deal
Don't Miss Out On Today's Daily Deal!
  • Home
  • Hotcoat Powder Super-Gloss Clear

    Hotcoat Powder Super-Gloss Clear

    Item #10286 Super-Gloss Clear

    Extremely durable, chip-resistant finish; coat and cure in under an hour

    In stock

    1. Powder Super Gloss Clear 8 Oz
      Item #10286
      Only $8.99

      In stock

    2. Powder Super Gloss Clear 1 Lb
      Item #10286LB
      Only $11.99

      In stock

    3. Powder Super Gloss Clear 25 Lb
      Item #1028625LBS
      Only $311.29
    4. Powder Super Gloss Clear 50 Lb
      Item #1028650LBS
      Only $622.59


    Do The Job Right with Eastwood Powders!

    • Provides extremely durable finish
    • Contains no environmentally harmful solvents
    • 100% Virgin powder
    • Impact resistant and flexibility
    • Good chemical resistance

    Eastwood Powders are far superior to liquid coatings. They provide an extremely durable finish that is chip resistant. All Powders are formulated of the highest quality materials and are chemical and fuel resistant. Eastwood Powders are durable enough for under hood applications and heat resistant up to 250 degrees F. They are suitable for any metal surface and most cure at a temperature of 400 degrees F at 20 minutes after flow out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.

    More info...


    8 Ounce powders are packaged in plastic bottles
    1 Pound powders are packaged in plastic Bags


    Color: High Gloss Clear
    Gloss Level: High Gloss 95%
    Cure Temperature: 375 Degrees
    Cure Time: 20 Minutes after flowout
    Powder Type: Polyester TGIC
    Finish: Smooth
    Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.


    When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.


    Eastwood 100% satisfaction guarantee


    CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.

    COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11676.

    CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.

    Customer Reviews

    Questions & Answers

    Customers also viewed: