• Home
  • Ingersoll Rand IR 314A 7 Inch Angle Polisher 2500Rpm

Ingersoll Rand IR 314A 7 Inch Angle Polisher 2500Rpm

Item #1047918 Brand: Ingersoll Rand

Variable speeds to polish and buff a variety of surfaces
This item ships directly from the supplier. Please allow one to two weeks for deliveryNo additional discounts apply.

Details

Ingersoll-Rand Heavy-Duty Air Angle Polisher/Buffer has variable speeds to polish and buff a variety of surfaces - IR314A

Heavy-Duty Pneumatic Angle Polisher/Buffer gives you a lot of work versatility with a wide free-speed range of 1500-2500 RPM for buffing and polishing a variety of surfaces-paint, metals and plastics-to a high-gloss, professional finish. With its heavy-duty motor and long-life ball bearing construction, this polisher can handle the toughest jobs. Includes built-in regulator, dead handle and spindle for easy handling, and 7" backing pad.

About Ingersoll Rand IR 314A 7 Inch Angle Polisher 2500Rpm

Heavy-Duty Pneumatic Angle Polisher/Buffer gives you a lot of work versatility with a wide free-speed range of 1500-2500 RPM for buffing and polishing a variety of surfaces-paint, metals and plastics-to a high-gloss, professional finish. With its heavy-duty motor and long-life ball bearing construction, this polisher can handle the toughest jobs. Includes built-in regulator, dead handle and spindle for easy handling, and 7" backing pad.


Specifications

HP: 0.4; Spindle Size: 5/8" x 11; Pad Diameter: 7"; Air Consumption At Load: 22 CFM; Average Air Consumption: 8 CFM; Variable Speed: Yes; Side Handle: Yes; Speed: 1500-2500 RPM; Min. Hose Size: 3/8"; Air Inlet Size: 1/4" NPT; Case Included: No; Pads Included: One 7"; Weight: 4.2 lbs.; Length: 15.98".


Safety

Always wear appropriate eye protection. Do not exceed recommended PSI. Hold tool securely (2-handed operation is recommended). Keep loose clothing, jewelry and long hair away from rotating components. Use only with specific "impact-rated" sockets, adapters and accessories for Impact wrench. Always make sure the work piece is securely clamped or anchored. Always disconnect tool from air supply when changing sockets, blades, bits or other accessories. 


Warranty

90 day manufacturer's defect warranty.


Customers also viewed: