• Home
  • Eastwood Welding Clamps - Intergrip Panel Clamps Set of 4
Eastwood Welding Clamps - Intergrip Panel Clamps Set of 4 is rated 4.3939 out of 5 by 33.
Rated 4 out of 5 by from neat and useful like the others said, a little weld on the post. One thing, the tack welds on the screw are very minimal. i can see them not holding up with much use. just if you have the welder out anyway, just give it another zap. otherwise i have to say very nice to have. bought 2 sets on sale. NOT worth full price because of quality but nice addition to the tool box when 1/2 price :) and that ONE time you really need them, it will be worth it.
Date published: 2012-08-25
Rated 4 out of 5 by from Good Product Like everyone else said, its like having a third hand. Word of caution though be sure to weld at least a couple of inches away from the clamp on either side, otherwise the shrinking caused by welding makes the clamps very difficult to remove from between the panels.
Date published: 2011-01-08
Rated 2 out of 5 by from Good tool, but overpriced I bought similar clamps with equal or better quality at a major tool retailer...... at one fifth the price. I buy a lot from Eastwood and love these guys, but sometimes the pricing is absurd.
Date published: 2014-01-17
Rated 4 out of 5 by from wow these things are awesome i thought that these things were overpriced and i could return them if i didnt like them but, after using them doing panel patch work on a tough to get to corner panel patch i love them and am thrilled to death that i got them. the only mod that i would recomend to do to them would put a small dab of weld on one end of the small rear block so you can use them vertical with out the block falling out before you finish setting the panel and tighten them this is a quick fix and its still a great product
Date published: 2011-03-11
Rated 4 out of 5 by from Better buy extras Design pinches thin retraction-strip on first use, causing it to bind from that moment forward. I've broken the weak weld to the screw's head on 3 so-far, after maybe 1-or-2 weld-uses each. That said, they do exactly what you'd expect. I plan to beef-up mine because they're pretty handy.
Date published: 2014-01-13
Rated 4 out of 5 by from Good little helpers Handy little tools to have in the fabrication toolbox. Drawbacks: a little pricey and the screw could be a bit longer. Very helpful with patch panel placement and maintaining your root gap.
Date published: 2013-11-18
Rated 5 out of 5 by from Just right I don't often need them but when I do they are worth their weight in gold, well almost. Clerverly designed and they hold very well in places that other clamps or fixtures can't.
Date published: 2010-11-14
Rated 5 out of 5 by from Intergrip panel clamp These clamps are a life saver for butt welding panels in the middle of a larger panel, where a set of deep channel locks just don't reach. Clecos work great for overlapping panels but when you need to butt weld a piece in, these Interlocking clamps are the cat's meow!!
Date published: 2011-06-07
  • 2016-02-12T08:53CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_33
  • loc_en_US, sid_19016, PRD, sort_relevancy
  • clientName_eastwood

Eastwood Welding Clamps - Intergrip Panel Clamps Set of 4

Item #19016 Brand: Eastwood

Easily align and grip panels for precise butt welds


4-Piece Intergrip Welding Clamp Set easily aligns and grips panels for precise butt welds.

  • Set of 4 clamps
  • Perfectly align panels
  • A must for long-lasting panel repairs
  • Easy 3-step process

Miniature butt-weld clamps align panels edge-to-edge and surface-to-surface with the appropriate 0.040" gap that helps you produce clean welds with minimal grinding.

More info...

About Eastwood Welding Clamps - Intergrip Panel Clamps Set of 4

Innovative panel-alignment clamps make it easier for you to position flat or curved panels for precise butt welds. Intergrip panel-alignment clamps work like miniature butt-weld clamps that align panels edge-to-edge and surface-to-surface, leaving an ideal 0.040" gap for full weld penetration. Clamp the sections together, tack weld, and remove the Intergrip welding clamps for final welding. The result is a clean butt weld that requires little grinding, and is less likely to trap moisture.


Set of 4 Intergrips securely hold flat or curved panels edge-to-edge and surface-to-surface for a nice clean joint.


Clamp the sections together, tack weld, and remove the Intergrips for final welding. Sometimes trimming the patch for a precise edge-to-edge fit is difficult and gaps need to be filled. Our 19038 Welder's Helper solves this problem by providing a backup that can be welded over without sticking.

Customers also viewed: