Home
Eastwood Internal Frame Coating w/Spray Nozzle

Eastwood Internal Frame Coating w/Spray Nozzle

Item #12515 Z

Spray coating inside chassis so it doesn't rust thru

Details

Internal Frame Coating destroys rust hiding inside the chassis, so it doesn’t rust its way through

You spend time and money restoring a chassis...but what about all that rust inside the frame? Use our Internal Frame Coating to make your chassis rust-free throughout!

Tough phenolic resin penetrates, converts and encapsulates the rust on the internal surface
Zinc phosphate seals it to prevent future corrosion
24"-long tube with conical nozzle reaches in to spray coating in a radial pattern for complete coverage
Covers 10 sq. ft. per can
Fully cures in 24 hours

About Eastwood Internal Frame Coating w/Spray Nozzle

Use our Internal Frame Coating to make your chassis rust-free throughout! Tough phenolic resin penetrates, converts and encapsulates the rust on the internal surface, and zinc phosphate seals it to prevent future corrosion. Penetrates under the heaviest surface rust. If not treated, the metal surface will continue to rust and begin to show as paint flaking, pin holes or even worse—structural frame failure.

14-oz. aerosol can includes an 24"-long extension tube with conical nozzle that reaches in to apply the coating in a radial spray pattern for complete coverage. Insert into bolt holes, lightening holes and any open access area in the frame. Spray using a back or forth motion to cover entire internal frame area. Two 14-oz. aerosol cans are required for a subframe vehicle, 3 cans for a full-frame vehicle or truck. Fully cures in 24 hours. Made in the USA.

Due to regulations pertaining to paint recycling, at this time we are unable to ship this product to Alberta, Canada.

Internal Frame Coating w/Spray Nozzle, 14-oz. aerosol

Application

Use included extension tube and conical nozzle, and insert into bolt holes, lightening holes and any open access area in the frame. Spray using a back or forth motion to cover entire internal frame area. Two 14-oz. aerosol cans are required for a subframe vehicle, 3 cans for a full-frame vehicle or truck.

(Q) When can I top-coat over it?
(A) Top coating can be done after the 24-hour cure. Can be used as a primer on external metal surfaces.

Always wear protective eye, face and hand protection when applying.

Click Here for Material Safety Data Sheet

1-year mfr's. warranty against defects.

Click here for instructions