- Internal Frame Coating 14 oz w/Spray Nozzle
Internal Frame Coating 14 oz w/Spray Nozzle
Internal Frame Coating destroys rust hiding inside the chassis, so it doesn’t rust its way through
- Tough phenolic resin penetrates, converts and encapsulates the rust on the internal surface
- Zinc phosphate seals it to prevent future corrosion
- 24"-long tube with conical nozzle reaches in to spray coating in a radial pattern for complete coverage
- Aerosol covers 10 sq. ft., qt. covers 50 sq. ft.
- Fully cures in 24 hours
You spend time and money restoring a chassis...but what about all that rust inside the frame? Use our Internal Frame Coating to make your chassis rust-free throughout!
About Internal Frame Coating 14 oz w/Spray Nozzle
Internal frame coating is formulated to convert and encapsulate the rust INSIDE your frame. Our formulation also incorporates zinc phosphate to further protect the metal from future corrosion. The viscosity is stabilized to assure proper flow and penetration to the existing corrosion and will yield complete coverage when sprayed with the included "conical nozzle". Easy to use and perfect for rust proofing, this must-have product is aerosolized to simply spray the entire inside of the frame with the supplied extension tube and "conical nozzle" for complete coverage and elimination of the rust for years of protection.
Internal Frame Coating w/Spray Nozzle, 14-oz. aerosol
Use included extension tube and conical nozzle, and insert into bolt holes, lightening holes and any open access area in the frame. Spray using a back or forth motion to cover entire internal frame area. Two 14-oz. aerosol cans are required for a subframe vehicle, 3 cans for a full-frame vehicle or truck.
Top coating can be done after 24 hour cure Can be used as a primer on external metal surfaces
always wear protective eye, face and hand protection when applying
made in USA 1 year warranty
Use included extension tube and conical nozzle and insert into bolt holes, lightening holes and any open access area in the frame. Spray using a back or forth motion to cover entire internal frame area. 2 cans are required for a subrame vehicle and 3 cans for a full frame vehicle. Note: truck frame will require 3 cans 1 can covers 10 sq ft.
Customers also viewed:
Leaves de-rusted metal ready to paint or powder-coat; liquid or gel
Starting at: $24.99
Clean grimy chassis and suspension parts with this aggressive formulaOnly $6.99
Transforms surface rust into a paintable surface!
Starting at: $17.99
15-oz. aerosol reformulated with TWICE the corrosion resistance!