• Home
  • Eastwood Jaded Green Metallic SSU Paint 3:1 96 oz

Eastwood Jaded Green Metallic SSU Paint 3:1 96 oz

Item #13724ZP

Premium acrylic urethane topcoat for exceptional long-lasting beauty
Not for sale or use in California. Eastwood Paints are formulated to meet National Rule VOC regulations; check with your local and state guidelines as some areas may have stricter regulations than others.

Details

Eastwood Jaded Green Metallic is a premium single-stage urethane topcoat that provides exceptional long-lasting beauty and durability. This premium two component system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings, a catalyzed urethane system offers unsurpassed durability and resistance to UV exposure, chemicals and annoying stone chips. Eastwood's line of paints will hold their gloss longer and won't yellow. 96 Fl. Oz 3:1 Because of the high metallic content a Clear Topcoat is recommended.

About Eastwood Jaded Green Metallic SSU Paint 3:1 96 oz

Eastwood Jaded Green Metallic is a premium single-stage urethane topcoat that provides exceptional long-lasting beauty and durability. This premium two component system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings, a catalyzed urethane system offers unsurpassed durability and resistance to UV exposure, chemicals and annoying stone chips. Eastwood's line of paints will hold their gloss longer and won't yellow. 96 Fl. Oz 3:1 Because of the high metallic content a Clear Topcoat is recommended.


Contents

1 US Gallon 128 fl ounces


Accessories

50307zp Low VOC Clear 999 Low VOC activator required. 50300zp Low VOC Primer 12817 paint gun accessory kit 12846Z Aerosol Injected Cleaner 50104zp Low VOC Reducer 20472 Air management system 12776 Evolution Paint Gun


Safety

Always wear appropriate eye, skin and respiratory protection. Consult MSDS for specific precautions and warnings.


Warranty

Made in USA 60 defect warranty


Application

Clean surfaces of all contaminants. Abrade surface to be painted with a minimum of 320 grit sandpaper working up to a 600 grit for maximum adhesions. Re-clean surface. Use caution mixing materials as paint may begin to gel after 2 hours at 70°. HVLP gun setting 8-10psi 1.2-1.6mm tip. Eastwood paint is designed to give complete coverage in 2 coats. Allow 10 minutes flash time between coats, should be tack free in 45-60 minutes, full cure in 18 hours. Product Information sheets available at eastwood.com