• Home
  • MIG Welder 135 Knurled Drive Roller
Knurled Drive Roller (MIG 135) is rated 2.75 out of 5 by 4.
Rated 3 out of 5 by from Knurled Drive Roller (MIG 135) I received my Knurled Drive Roller and it does not have a set screw. It says in the description to use your original but my original doesn't have one either. What it has is a notched key stock. And the Knurled Drive Roller has no notch so it just spins with no set screw. Just a paper wait for me. :(
Date published: 2012-05-17
Rated 2 out of 5 by from Wrong Design Same problem as arojaz. Saw a video of Mig135 from 2009 (welder was blue), and this roller is designed for the older model. The current Mig135 has a keyway in the drive shaft. Not worth sending back - I'll try to modify it.
Date published: 2012-06-05
Rated 1 out of 5 by from Doesn't fit my MIG welder No dimensions provided, so the only way to find out if it would work was to try it. No luck. Not worth the postage to ship it back.
Date published: 2015-02-17
Rated 5 out of 5 by from Knurled drive older Looks well Bilt I haven't used it yet but when I to use it in the welder I got from Eastwood I will give another review
Date published: 2015-01-29
  • 2015-03-30T11:15CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_13790, PRD, sort_relevancy
  • clientName_eastwood

MIG Welder 135 Knurled Drive Roller

Item #13790 Brand: Eastwood

V-groove for 0.023" solid wire; knurled for 0.030"-0.035" flux core

Details

This drive roller fits the Eastwood MIG135 Welder and is a knurled replacement for the original drive roller. This roller has one V groove side for 0.023" (0.6mm) solid wire and one knurled side for 0.030" (0.8mm) to 0.035" (0.9mm) flux cored wire.

More info...

About MIG Welder 135 Knurled Drive Roller

This drive roller fits the Eastwood MIG135 Welder and is a knurled replacement for the original drive roller. This roller has one V groove side for 0.023"(0.6mm) solid wire and one knurled side for 0.030" (0.8mm) to 0.035" (0.9mm)flux cored wire.


Contents

Includes: 1 Knurled Drive roller for the MIG135.


FAQ's

Easily installs by loosening the set screw in the original drive roller,sliding it off the drive shaft and sliding the knurled roller on, finalized by tightening the set screw.


Safety

Make sure unit is turned off and unplugged before attempting to install this drive roller.