• Home
  • MIG Welder 135 Knurled Drive Roller

MIG Welder 135 Knurled Drive Roller

Item #13790 Brand: Eastwood

V-groove for 0.023" solid wire; knurled for 0.030"-0.035" flux core

Details

This drive roller fits the Eastwood MIG135 Welder and is a knurled replacement for the original drive roller. This roller has one V groove side for 0.023" (0.6mm) solid wire and one knurled side for 0.030" (0.8mm) to 0.035" (0.9mm) flux cored wire.

More info...

About MIG Welder 135 Knurled Drive Roller

This drive roller fits the Eastwood MIG135 Welder and is a knurled replacement for the original drive roller. This roller has one V groove side for 0.023"(0.6mm) solid wire and one knurled side for 0.030" (0.8mm) to 0.035" (0.9mm)flux cored wire.


Contents

Includes: 1 Knurled Drive roller for the MIG135.


FAQ's

Easily installs by loosening the set screw in the original drive roller,sliding it off the drive shaft and sliding the knurled roller on, finalized by tightening the set screw.


Safety

Make sure unit is turned off and unplugged before attempting to install this drive roller.