• Home
  • Lab-Metal Tube 20 oz

Lab-Metal Tube 20 oz

Item #10289Z Brand: Alvin Products

Metal repair putty, dent filler and patching compound... ready-to-use

Details

Lab-metal® is a metal repair putty, dent filler and patching compound...ready-to-use right out of the caulk tube! Make fast, permanent repairs, especially before powder-coating. Lab-metal® ready-to-use repair compound applies easily, and hardens quickly into metal.
  • Aluminum-filled, 1-part repair putty
  • Fills dents and flaws easily and economically
  • Can be milled, chiseled, drilled, sawed, tapped and machined
  • No catalyst needed so it's easy to apply
Now Lab Metal is available in a convenient 20 oz. caulk tube. No mixing required with this easy to use format. This is the same metal-reinforced leveling agent as our popular (10207Z) Lab Metal. Use a body filler spreader dipped in Lab Solvent (10208ZP) for a smooth surface.

About Lab-Metal Tube 20 oz

Now Lab Metal is available in a convenient 20 oz. caulk tube. No mixing required with this easy to use format. This is the same metal-reinforced leveling agent as the popular (10207Z) Lab Metal. Use a body filler spreader dipped in Lab Solvent (10208ZP) for a smooth surface.


Contents

One 20 oz. standard size caulk tube.


Accessories

The 10208ZP Lab Solvent (one pint) helps smooth out Lab Metal.


Warranty

Made in the USA. 30 Day Eastwood Warranty.


Application

Remove paint, rust, oil, dirt, moisture from application surface. Lab-Solvent is used to clean the surface. Trim nozzle to produce desired bead and load cartridge into standard caulk gun. To fill holes, apply in thin layers (less than 3/8"). Let each layer dry before applying the next. Dry time: 1/16" layer hardens in 1-2 hours; 1/8" hardens in 3-4 hrs. Infra-red lamp use will speed drying time. For verticle or overhead applications, load Lab-metal into open container and allow to stand 5-10 minutes to render it less fluid. Shelf life 2 years in unopened tube. Not to be used as an adhesive.