• Home
  • Large View Auto Darken Welding Helmet
Large-View Auto-Darkening Welding Helmet is rated 4.0 out of 5 by 34.
Rated 5 out of 5 by from One outstanding Helmet My new large view auto darken welding helmet was a purchase that I should have made sooner. The fit when I'm wearing it is very comfortable and the large view is a must for any welder. I purchased the new helmet to replace an older helmet with a small view and the difference is so much better. It is much easier to see what you are welding weather you are welding overhead, horizontal,, vertical, or flat. The auto darkening feature works very well in all types of welding. The helmet construction is as good as any helmet I've used or tried in the past. I would definitely recommend this helmet to anyone doing any type of welding.
Date published: 2013-03-02
Rated 4 out of 5 by from I agree......... As another review says, the helmet seems to be a good value, multi-adjustable headband and LCD panel, large clear window. Very nice for a sub-$100 helmet. BUT......I agree that the shade adjustment, located on the outside of the helmet, while a nice feature in it's location, is too easy to turn. There needs to be a friction washer or detent added to make accidental adjustment less likely.
Date published: 2011-11-04
Rated 1 out of 5 by from a great looking helmet to bad i never got to try it out, i tried adjusting the head band, the mechanism popped open, and small pieces popped out, which one was lost, also it did not open wide enough to fit over my welding cap, also the lens is wide, what good is it if it is so low, when i put the helmet on, all i saw was top o shield, where there was no view opening, a nice looking helmet, a poor design, i sent it back immediately, waiting for a refund on credit card. ik not negative or rarely complain.
Date published: 2015-01-18
Rated 1 out of 5 by from Poor Quality Out of the box, the batteries were dead, had to buy new ones. Then, found that it does not always "auto darken!" and flashed myself several times before I went back to my old non-auto helmet. Also, the adjustment knob outside the helmet turns too easily and can be moved by lightly rubbing against it, and unknowingly, can have the wrong setting. This helmet is dangerous!!!
Date published: 2014-06-20
Rated 4 out of 5 by from Helmet works fine but.... The helmet did not auto darken as I received it. Being an electronic technician, my first instinct is to check out the supplied batteries, and sure enough one of the two button battery is weak. A trip to drug store and 8 dollars later, helmet works as it should be. No complaints here.
Date published: 2013-06-16
Rated 4 out of 5 by from Works well The auto darling feature of this helmet works very well. My only complaints are: (1) the darkness adjusting knob on the side does not maintain its position well and (2) the up-down helmet tension adjusting knobs on the side will not maintain tension on the helmet and it will not stay up or down without re-tensioning the helmet to headgear knobs every 3 to 4 up-down cycles.
Date published: 2014-01-16
Rated 5 out of 5 by from great with, one litle thing well great considering the miller one is 160.00 this one is 89.99 works great i can see and when the arc fires the lens darkens, is adjustable sesativity and delay is adjustable as well. the only thing is the darkening adjustment knob is real real easy to turn, i know i could inadvertenly bumb the nob and it would twist changing the darkening level. but again its a real real nice lid. latch that fits around the head is comfy and secure
Date published: 2011-08-26
Rated 4 out of 5 by from good value This helmet works as nicely as any, but you must treat it gently. Take care of your tools, even inexpensive ones, and you will get your money's worth out of them.
Date published: 2012-06-10
  • y_2017, m_1, d_18, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_34
  • loc_en_US, sid_13212, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_eastwood

Which direction do the replacement batteries face?  There are no + or- indicators

Asked by: Sunbugone
Negatives are sandwiched together on the inside.
Answered by: KHoffnagle
Date published: 2016-12-05

Who is the manufacturer of this helmet and in what country is it manufactured?

Asked by: GR US
This helmet is our brand and is manufactured overseas in China...
Answered by: KHoffnagle
Date published: 2016-05-31

Can cheater lenses be used with this helmet? I know some have adapters to hold the smaller 2x4 lenses?

Asked by: jerr
We do not have any adapters for cheater lenses for our helmets.
Answered by: S Church
Date published: 2016-04-19

does the hood fit over a helmet? like a construction helmet?

Asked by: michelleS
No, this is designed to be used on its own without any other headgear.
Answered by: MikeL
Date published: 2016-01-15

Is the "robust Li-Mi battery" replaceable at the end of its service life?

Asked by: johnnyboy
This helmet has a replaceable battery. It uses the common 2025 button cell batteries.
Answered by: S Church
Date published: 2015-12-17

How many sensors in this helmet?

Asked by: susO1
This helmet has two sensors.
Answered by: MikeL
Date published: 2014-11-07

Does the welding helmet have a grind mode?

Asked by: trukemean
No it does not have a grind mode
Answered by: SeanA
Date published: 2014-10-22
  • 2017-01-19T07:59CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_en_US, sid_13212, PRD, sort_recentAnswersFirst
  • clientName_eastwood

Large View Auto Darken Welding Helmet

Item #13212 Brand: Eastwood

Shade adjustment from #9-#13, with a big 3.6" x 2.6" viewing area

Details

This Large View Auto darkening welding helmet with infinitely adjustable sensitivity and shade adjustment from #9 - #13. 0.0025 per second darkening feature with robust Li-Mi battery that charges with arc and solar power.

  • Great for ARC MIG and TIG Welding
  • High Strength Mask Material
  • High Clear View Filter
  • Full Conformity with ANSI and CE
  • Lens Sensitivity Controls
  • Variable Delay From Dark to Light State

Battery life is approximately 5000 welding hours. Viewing area is 3.6" x 2.6" and features replaceable lens protectors. Helmet has adjustable head band and features a very durable nylon constructed shell.


More info...

About Large View Auto Darken Welding Helmet

Technical Specifications:
  • Power Supply: Li-Mi & Solar Combination
  • Viewing Area: 3.6"" x 2.6""
  • UV/IR Protection: Up to Shade DIN 15 at all time
  • Operating Temperature: 23°-131°:(-5°:C-55°C)
  • Light State: Shade DIN 4(3)
  • Variable Dark Shade: Shade DIN 9-13(5-9)
  • Light to Dark Switching Time: 1/25000s
  • Dark to Light Delay Time: Adjustable 0.3s-0.6s

  • Contents

    Includes: 1 Large View Auto Darken Welding Helmet w/Extra spatter shields.


    Accessories

    12589 Welding Gloves Large & Medium
    MIG Welders Pliers
    #13212 #14425 Helmet lens cover inside
    #13203 #13212 #14425 helmet lens cover outside


    Application

    Mig Welding Tig Welding Plasma Cutting Grinding


    Safety

    Always wear helmet, gloves and proper clothing when welding to protect from UV and ht metal burns.


    Customer Reviews

    Questions & Answers

    Customers also viewed: