- Lincoln MIG Welder 180T
About Lincoln MIG Welder 180T
The Lincoln® SP-180T can help you get it done for farm, light fabrication, auto or home projects. Just plug into a 208 or 230 volt outlet in your garage, barn or shop and the simple two knob tapped control makes it easy to tackle thin steel or stainless sheet metal with MIG or thicker steel with flux-cored welding.
Forgiving arc makes dialing in your application easy.
Smooth arc starts with minimal spatter.
Wide 30-180 amp welding output range - use .025"" wire on the thinnest sheet metal up to .045"" flux-cored wire on thick plate.
MIG weld 24 gauge up to 3/16"" sheet metal in a single pass.
Precision full adjustment drive system reduces chance of wire tangling and crushing.
Brass-to-Brass gun connections for enhanced connectivity.
Large industrial closed-design drive motor for improved torque and trouble-free performance.
No Hassle Tool-less Design – for wire spool mounting, wire drive service and polarity changes.
Innovative contact tip, drive roll and nozzle storage – keeps all your consumables close at hand.
Power Chassis™ channels airflow to cool power systems, structurally secures key components and traps wires and cables to avoid unnecessary abrasion.
Magnum® 100L gun and 10 ft. (3.0 m) cable assembly with brass gun connection and 4-pin MS-Type connection for trigger control (K530-6)
.025" (0.6 mm) Contact Tips (Qty. 3)
.035" (0.9 mm) Contact Tips (Qty. 3)
Gas-less Nozzle for Inner shield® welding
Gas Nozzle for MIG welding
Spindle Adapter for 8" (203 mm) Diameter Spools
.025" (0.6 mm) Wire Diameter Drive Roll for MIG welding (KP2529-1)
.035" (0.9 mm) Wire Diameter Drive Roll for MIG welding (KP2529-2)
.030"-.045" (0.7-1.1 mm) Wire Diameter Knurled Drive Roll for Flux-Cored welding (KP2529-3)
Incoming/Outgoing Wire Guide Set (KP2530-1)
Shielding Gas Apparatus
Harris® 3000290 Gas Regulator and 52 in. (1.3 m) Hose for use with CO2 or argon blend gases.
2 lb. (0.90 kg) Spool of .025" (0.6 mm) diameter SuperArc® L-56® premium MIG wire (ED030583)
1 lb. (0.45 kg) Spool of .035" (0.9 mm) diameter Innershield® NR-211-MP flux-cored wire (ED027641)
Work Clamp and 10 ft. (3.0 m) Cable
Instruction Manual (IM891)
How to Use DVD
Learn to Weld Manual (LTW1)