• Home
  • Liquid Ice Extra Cut Polishing System
Liquid Ice Extra Cut Polishing System is rated 3.6 out of 5 by 5.
Rated 4 out of 5 by from Liquid Ice Extra Cut Polishing System Worked better than advertised! I used it on my 91 Mustang that was painted about 3 years ago but has been neglected since. Finish rough to the touch. After polishing, finish was very high gloss and smooth to the touch. System is easy to use but instructions are very limited, even from Norton. The 3" version has NO instructions or recommended tool. Eastwood should create a video. Plenty of polish with the kit. Best to use sparingly. A little goes a long way.
Date published: 2011-07-07
Rated 4 out of 5 by from Good product I have used this product with good success to color sand out orange peel from clear coat and polish back to a show car shine. Starting with 1200 grit sanding, then the 1, 2, and 3 pads with the polish will bring out an amazing shine. I am a hobbyist, not a professional, and I have found this easier to use with better results than other polishing systems.
Date published: 2014-04-26
Rated 4 out of 5 by from Buffing I give it a 4 because I don't know what is best. I think it depends on type of paint it is used on. I used all PPG products on a 66 Chevelle. Marina Blue Poly and it works great. I have tried 3m but it dries out too fast. Wet sanding is a PITA but you have to do it if you want it to come out nice.
Date published: 2014-06-21
Rated 5 out of 5 by from Excellent System I used this product as a body shop detailer, and it made the job easy. Now that I am a shop manager, I use it exclusively on my customer's car as well as my own. I never have to worry about who used what compound on each pad.
Date published: 2015-03-14
Rated 1 out of 5 by from bad this is the worst compound ive tried. it didnt remove a single scratch from my car. as the saying goes, you get what you pay for. im going to stick with 3M
Date published: 2011-11-12
  • 2015-04-27T08:33CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_25266, PRD, sort_relevancy
  • clientName_eastwood

Can Liquid Ice be applied at temperatures of 40 to 50 degrees

Asked by: Inspector44ab
  • 2015-04-27T09:08CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasquestions, tq_1
  • loc_en_US, sid_25266, PRD, sort_recentAnswersFirst
  • clientName_eastwood

Liquid Ice Extra Cut Polishing System

Item #25266 Brand: Norton

Removes scratches and swirl
marks; produces high-gloss finish


Liquid Ice Finishing System creates a beautiful high-gloss finish in just 3 easy steps System with 6" pads has everything you need except the power buffer. Start by squirting on some of Norton's Liquid Ice, then...
  • Step 1 removes all sanding scratches
  • Step 2 removes any polish swirl marks
  • Step 3 produces the high-gloss finish

More info...

About Liquid Ice Extra Cut Polishing System

Creating a flawless high-gloss finish is now as easy as 1-2-3. After squirting on some of Norton's Liquid Ice, start with Step 1, the Super Cut-Wool Pad, to remove all sanding scratches. Switch to Step 2, the Blue Foam Cutting Pad, to remove any polish swirl marks. Switch to Step 3, the White Finishing Pad, to produce a high-gloss finish and finish your paint job off right. For best results, use a buffer that operates in the 1000- to 1500-rpm range.


12019 Liquid Ice Cutting Polish
12014 Super-Cut Wool Pad (6")
12015 Blue Foam Pad (6")
12016 White Finishing Pad (6")
12017 Backing Plate


29981Z Norton Detailer Spray
43311 DeWalt® Variable-Speed Buffmaster Polisher


Use in a well-ventilated area. Always wear eye, skin and respiratory protection.

Customers also viewed: