• Home
  • Bright White Basecoat Gallon Kit

    Bright White Basecoat Gallon Kit

    Item #13568ZP

    Urethane basecoat works with our Low-VOC Primers, Clears; w/ activator


    Bright White Basecoat adds the superior durability of urethane to the ease of conventional basecoats Bright White Basecoat Kit is a low-VOC system, so it meets regulatory limits in highly-regulated areas, eliminating the need to switch to a waterborne system.
    • Apply a durable urethane finish wherever you live in the continental US, even CA
    • Choose a fast, medium or slow Low-VOC Activator below
    • Mixes 4:1 with your activator choice
    • Makes 5 sprayable quarts
    • Clearcoat required

    More info...

    About Bright White Basecoat Gallon Kit

    Eastwood's innovative Low-VOC Urethane Basecoat Paint System combines the ease of use of conventional basecoats with the superior durability and unmatched performance of more modern urethane. If you combine the basecoat system with our Low-VOC Primers and Clears, you'll be able to apply a durable urethane finish to any car, anywhere in the continental U.S.and Canada

    Mixes 4:1 with Eastwood's Universal Low-VOC Urethane Activator (included; select Fast, Medium or Slow).


    Bright White Urethane Basecoat, 1 gallon
    Low-VOC Urethane Activator, 1 qt. (your choice of Fast, Medium or Slow)


    10041Z PRE Painting Prep
    50300ZP Low-VOC Gray Urethane Primer
    12817 Paint Gun Accessory Kit
    12846Z Aerosol-Injected Cleaner
    50104ZP Zero-VOC Urethane Paint Reducer
    20472 Air Management System
    12776 Evolution Paint Gun


    Use Eastwood's PRE Painting Prep to prep surface and remove all traces of contaminants. Sand existing finish with 400-600-grit abrasive. Clean surface again. Mix 4:1 with appropriate-speed activator. Reduction not necessary. Shake well. Use HVLP 1.2mm-1.4mm gun nozzle size. Apply in 2 medium wet coats with 50% overlap. Allow 10 minutes flash time between each coat. Clear coat can be applied after 20-30 minutes. Maximum recoat time is 18 hours; otherwise surface must abraded with 400-600-grit.


    Always wear appropriate eye, skin and respiratory protection. Consult MSDS for specific precautions and warnings .VOC = 3.5 lbs./gallon.

    Product Information Sheet

    Click here for product instructions

    Customers also viewed: