• Home
  • Eastwood Low-VOC Clear and Med Activator Kit

Eastwood Low-VOC Clear and Med Activator Kit

Item #50067ZP Brand: Eastwood

Dries fast, with a beautiful gloss, excellent DOI

Details

Eastwood Low VOC Urethane Clear is a premium 4:1, high-solids clearcoat. It dries fast, with a beautiful gloss and excellent DOI

  • Flows and levels easily
  • Excellent resistance to shrinkage and dieback
  • Durabe and long-lasting UV protection
  • Quick Drying

Eastwood Low VOC Urethane Clearcoat is a high solids system that delivers beautiful results and long lasting protection while staying within the limits of even the most stringent VOC regulations. Includes 1 qt. Eastwood Low-VOC Activator. Mixes 4:1, 4 parts clear, 1 part activator.


More info...

About Eastwood Low-VOC Clear and Med Activator Kit


MIXING RATIO
Thoroughly mix four parts 50307ZP Low VOC Urethane Clearcoat with one part Low VOC Urethane Activator and up to 20% Low VOC Reducer

Use caution in mixing materials as 2K Urethane Primer may begin to gel after approximately two hours (at 70°F).

SPRAY GUN SETUP
HVLP Gun: Fluid Tip 1.3-1.5 mm Inlet Spray Pressure 25-30 psi
Conventional Gravity: Fluid Tip 1.3-1.5 mm Inlet Spray Pressure 45-55 psi
Conventional Siphon: Fluid Tip: 1.4-1.7 mm Inlet Spray Pressure 45-55 psi

APPLICATION INSTRUCTIONS
Apply Eastwood’s Low VOC Urethane Clearcoat in two to three medium wet coats as necessary to achieve desired film build, allowing 15-20 minutes flash time between coats.

Clear should dry dust free within 10-15 minutes and tack free in 15-25 minutes. Wait 12 hours to tape, polish or stripe.

All dry times will vary based on activator, reducer, shop temperatures, air flow and total film thickness.

Baking is not recommended for this clearcoat.


Contents

One US gallon of clear
128 fl oz 1 US Quart of Activator


Accessories

10041z PRE Paint Prep 51550 Concours paint Gun 51136 EW Color Chart 20474 EW Dry air system 12817 Paint Gun accessory kit 51559 EW Digital regulator


Product Information Sheet

Click here for product information sheet


Safety

Use in well ventilated area always wear eye, skin and reparatory protection consult MSDS and Product data Sheet for specific safety instructions


Warranty

MADE IN THE USA


Customers also viewed: