Martin Body and Fender Tools
 
 

Made in USA
 
Body Hammer
 
Body Hammer
Description
Handle
Click to Buy
Used For
Dinging Hammer
For fender and high-crown panel dinging or bumping. Both high and low crown faces for "on and off dolly" work. Faces 1 1/4" and
1 9/16". Round heads, 6" overall, Weight 1.04 lbs.
Cross Chisel Shrinking Hammer

Wood 31034

Cross grooved. Extra wide faces are crossed grooved and used for shrinkage on large surfaces. Chisel end used on sharp Corners. Flat round face 1 9/16" dia., Chisel 3" long, Weight .87 lbs.
General Purpose Pick Hammer
Medium size point and reach for general work. Low crown strawberry point for perfect balance. Face 1 9/16" round point, 3/32" radius. Length of pick end 3 3/4". Weight .91 lbs.
Door Skin Hammer
For high crown work and finishing, without poking holes in thin sections. 6 1/2" overall length. Weight .94 lbs.
 
Dolly Blocks
 
Type
Click on Picture
to Purchase
Part Number
Description
Toe Dolly
Click Here to Purchase

1058

31039

Thinness and length provide easy accessibility to narrow pockets. Large, flat face is frequently used in shrinking and dinging flat panels. Approximately 5" x 2 1/4" x 1". Weight 2 1/2 lbs.
Shrinking Dolly(Serrated)
Click Here to Purchase
1058S

31083

Shaped like a toe dolly but has one face covered with serrations for shrinking metal stretched by dents.
Weight 3.4lbs.
General Purpose Dolly
Click Here to Purchase

1060

31032

Provides convenient and comfortable hand hold during heaviest blows. Weight, balance, and several differently crowned working faces, together with two bead and flange lips gives this dolly broad general use. 3" x 2 5/8" x 2 1/4". Weight 3 lbs.
 
Body Spoons
 
Type
Click on Picture
to Purchase
Part Number
Description
Light Dinging Spoon
Click Here to Purchase

1036

31036

 

To ding ridges smooth and level. When held against ridge and struck with hammer, spreads blow over large area making smooth job and preventing damage to finish. Length 10" overall, face 2" x 4 5/16"
Spoon Dolly
Click Here to Purchase

1052

31037

 

Long handle permits many uses in places otherwise inaccessible. Can be driven between reinforcements and outer panel, then used to pry outward as the metal is dinged.Excellent forming and caulking tool for deep pockets of doors, quarter-panels, and lower trunk panels. 2 1/2" x 1" x 3"
Long Curved Spoon
Click Here to Purchase
1054

31038

Long, thin, curved blade is handy for prying up dents behind curved reinforcements in header panels, hinge anchors in doors, body pillars and reinforcements in hoods and radiator shells. Length 10 1/2" overall, Face 2" x 7"
Surfacing or Slapping Spoon
Click Here to Purchase

1024

31222

Excellent spoon for fender spring hammering, finishing and shaping. Curve gets behind inner construction between panels that are close for removal of dents. Molds panels. 9" blade length 2 1/8" width, overall length is15 1/8"
 
Body and Fender Sets
 
Martin's Body Hammer Set 12184

This selection of 4 of the most popular Martin body hammers. All are constructed with a rugged fiberglass shank, vibration-absorbing rubber grip and famous Martin quality steel heads. Also included is a dense cell foam protective holder. MADE IN USA.

Click Here to Purchase
Click Here to Purchase
Professional Hammer & Dolly Set With Wood Handles 13 Piece Kit 31111
If you want to buy one hammer and dolly set that will meet most straightening needs with lifetime durability this is it. Traditional wood handles offer excellent ballance with little rebound. MADE IN USA.

Click Here to Purchase
Professional Hammer & Dolly Set With Fiberglass Handles 13 Piece Kit 31311
This kit is the same as the wood handle kit, but has the advantage of more durable fiberglass handles. The wide range of tool profiles makes the applications almost unlimited. MADE IN USA.
Click Here to Purchase
Starter Hammer & Dolly Set with Wood Handles 8 Piece Kit 31084
Just getting started with metal straightening? Here are the tools most frequently used. Traditional wood handles offer superb balance with little rebound. MADE IN USA.
Click Here to Purchase
Starter Hammer & Dolly Set with Fiberglass Handles 8 Piece Kit 31284
This kit is the same as the wood handle kit, but has the advantage of more durable fiberglass handles. These area tools are designed to last a lifetime. MADE IN USA.