- Master Steering Wheel Repair Kit W/Instruc
Master Steering Wheel Repair Kit W/Instruc
Item #52196 Z
- PC-7 Epoxy
- Adhesion Promoter
- PRE Painting Prep
- Adhesion Promotor
- Instructions and Restoration Book
About Master Steering Wheel Repair Kit W/Instruc
This kit makes it easy to repair cracked plastic or hard-rubber steering wheels, and gets them ready to top-coat. California residents, be sure to order #52196ZCA for the Low-VOC kit.
Due to regulations pertaining to paint recycling, at this time we are unable to ship this product to Alberta, Canada.
52047 1-lb. Can of PC-7 Epoxy
10041Z or 11949z PRE Painting Prep (standard or Low-VOC)
52366Z Adhesion Promotor
52017 Steering Wheel Restoration Book
Application / Accessories
52195 Additional 1/2-lb. Can of PC-7 Epoxy
52047 Additional 1-lb. Can of PC-7 Epoxy
Review manual for steering wheel removal. Wash wheel with dishwashing detergent and rinse. Once dry, wipe down with PRE Painting Prep. Use a triangular file to "V"-out the crack down to the metal frame. Mix equal parts of PC-7 Epoxy "A" and "B" sufficient to fill defects. Press PC-7 into cracks and smooth with a wet finger. Allow repair to fully harden overnight. Sand repair areas by hand with 220-grit abrasive paper, and then 320-grit paper. Wipe wheel with PRE Painting Prep, and handle with clean, disposable gloves. Apply Self-Etching Primer per label directions to fill minor imperfections, then topcoat.