• Home
  • Evercoat® Metal To Metal Filler Quart With Hardener
Evercoat® Metal To Metal Filler Quart With Hardener is rated 4.8571 out of 5 by 7.
Rated 5 out of 5 by from Solid Product Covering a weld and not wanted a product to lift off the surface I purchased this though pricey. The activator doesnt change color but the product does change consistancy letting you know its mixed. Sands well and feathers smooth without the need for additional product. If you use this product correctly you will be happy with results! I will purchase more in the future as it is a great product.
Date published: 2013-03-21
Rated 5 out of 5 by from Great product Product worked as promised. Dried hard and tough. Very sandable and easy to manage.
Date published: 2010-02-23
Rated 4 out of 5 by from Good Stuff Very strong. The price keeps going up, but it's still worth it.
Date published: 2012-10-26
Rated 5 out of 5 by from Great Stuff! metal 2 metal works great for initial filling, feathers great, is extremely resilient, and doesn't cost an arm and a leg. it takes a little practice to use at first as the included catalyst doesn't change the color of the filler, making it hard to tell if it's mixed thoroughly. Overall though, it's a great product!
Date published: 2010-10-04
Rated 5 out of 5 by from Works as advertised. Easy to use, easy to sand. Best part is it will withstand the heat needed to cure powder coatings.
Date published: 2012-10-16
Rated 5 out of 5 by from Great Product Applies smoothly, sands easily to a feather edge. Easy to use.
Date published: 2014-11-22
Rated 5 out of 5 by from A mixing formula for small batches Golf ball=2.48 cu " per 12 drops hardener. Doing the math, .62 cu" per 3 drops. Draw a 1-3/4" circle on mixing surface. Add filler to circle boundary up to about 1/4" high. This should equal about .59 cu " of filler. Add the three drops, mix. Worked great for me to fill a small depression.
Date published: 2015-02-10
  • 2015-03-04T11:03CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_10021ZP, PRD, sort_relevancy
  • clientName_eastwood

I used  fast etched  to remove flash rust after the body has been sitting for 2 years.Can I  use metal to metal over fast etch? Or do I need grind or sandblast the surface to remove the Zinc phosphate coating?

Asked by: 51Dodge
The surface should be hit with a sander or grinder in order to give it a "tooth" for the filler to bite to, so in that process you'll end up removing whatever Fast etch residue remains, so there will be no issues. All body fillers should always be applied over a clean, sanded/ground surface.
Answered by: MikeL
Date published: 2015-01-16

Can this be used on air cleaners which can reach high engine temperatures?

Asked by: Danplymouth

Can this filler be powder coated? (stand up to high temps)

Asked by: Flip
  • 2015-03-04T11:59CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_10021ZP, PRD, sort_recentAnswersFirst
  • clientName_eastwood

Evercoat® Metal To Metal Filler Quart With Hardener

Item #10021ZP Brand: EverCoat

Applies like a plastic filler, but
reinforced with fine aluminum particles

Details

Aluminum-filled Metal-2-Metal™ is the "nearest thing to lead" Unique Metal-2-Metal™ Filler applies like typical plastic fillers, but it's reinforced with fine aluminum particles to help produce a stronger repair.
  • Waterproof, so there's little chance of corrosion under the patched areas
  • Apply directly to bare metal to smooth minor ripples in body work
  • Easily sands to a fine feather edge
  • Includes hardener

More info...

About Evercoat® Metal To Metal Filler Quart With Hardener

This unique product applies like typical plastic fillers, yet is made with fine aluminum particles, which helps make for a stronger repair. Waterproof, so there is little chance of corrosion under the patched areas. Apply right to bare metal to smooth minor ripples in body work. Hardener included. Use Eurosoft Glazing Putty as a final step to fill pinholes and small imperfections before painting.


Contents

Metal-2-Metal is supplied in a quart container. The high metal content of this filler makes it much more durable that regular plastic body fillers.


Application

Metal-2-Metal is excellent for all body filling applications. Use in a well ventilated area. Wear a dust mask when filing or sanding.


Customers also viewed: