- Evercoat® Metal To Metal Filler Quart With Hardener
I used fast etched to remove flash rust after the body has been sitting for 2 years.Can I use metal to metal over fast etch? Or do I need grind or sandblast the surface to remove the Zinc phosphate coating?
Can this be used on air cleaners which can reach high engine temperatures?
Can this filler be powder coated? (stand up to high temps)
I did a top chop on a 46 pickup - I found a large section of lead filler(both sides) - the lead is removed (by heat) lots of dents(top is rough) - what filler can I use over the lead areas to make repairs and smooth welds where sectioned?
I made some metal fender fillers for my bike, but when I welded the brackets on there was some waviness on the finish side that I plan on powder coating. If I use Metal To Metal Filler Quart With Hardener, Am I able to powder coat over that area.
Evercoat® Metal To Metal Filler Quart With Hardener
Item #10021ZP Brand: EverCoat
reinforced with fine aluminum particles
- Waterproof, so there's little chance of corrosion under the patched areas
- Apply directly to bare metal to smooth minor ripples in body work
- Easily sands to a fine feather edge
- Includes hardener
About Evercoat® Metal To Metal Filler Quart With Hardener
This unique product applies like typical plastic fillers, yet is made with fine aluminum particles, which helps make for a stronger repair. Waterproof, so there is little chance of corrosion under the patched areas. Apply right to bare metal to smooth minor ripples in body work. Hardener included. Use Eurosoft Glazing Putty as a final step to fill pinholes and small imperfections before painting.
Metal-2-Metal is supplied in a quart container. The high metal content of this filler makes it much more durable that regular plastic body fillers.
Metal-2-Metal is excellent for all body filling applications. Use in a well ventilated area. Wear a dust mask when filing or sanding.
Customers also viewed:
Premium body filler, plus 5 spreaders, 100 mixing board sheetsOnly $69.99
Reinforced with aluminum for a stronger, corrosion-resistant repair
Adjustable holder, 10 flat rasp blades, 10 half-round rasp bladesOnly $69.99