- Eastwood MIG Welder 175 Amp With Spool Gun, Cart & Helmet Kit
Eastwood MIG Welder 175 Amp With Spool Gun, Cart & Helmet Kit
- Welds mild and stainless steel, 24-ga. to 5/16"
- Welds aluminum, 14-ga. to 1/4"
- 30-175-amp welding range
- Includes FREE spool gun ($199.99 value!)
- Includes auto-darkening helmet (12099)
- Includes a 3-shelf welding cart (12236)
- Powered by 220v current
- Compare to similar welders that sell for over $700
- ETL Approved
- Backed by Eastwood's no-hassle return policy and 3-year warranty
About Eastwood MIG Welder 175 Amp With Spool Gun, Cart & Helmet Kit
MIG 175 welder with cart and auto-darkening helmet is designed for the professional or weekend enthusiast. Welder comes complete (except for the gas cylinder) and ready to weld 24-gauge to 5/16" mild steel and stainless, plus 14-ga. to 1/4" aluminum. 3-shelf cart provides portability and stability for the welder and your gas cylinder. Auto-darkening helmet has an adjustable viewing shade from #9 to #12, and a large 1.87" x 3.87" lens.
Welder has a 30% duty cycle at 135 amps, and 30-175-amp welding range. Feeds wire at 58"-471" per minute, and has infinitely adjustable wire speed and heat settings. Includes a precision-drive motor, regulator with hose, spool gun (for welding 19-gauge to 1/4" aluminum plate), wire, tips and accessories...just add your own cylinder of CO2/Argon. "Quick Set" weld chart specifies settings for each material thickness, eliminating guesswork and assuring complete penetration. Backed by Eastwood's no-hassle return policy and a 3-year manufacturer's warranty.
12012 MIG 175 Welder (89 lbs.)
12236 Welding Cart (13 lbs.)
13203 Auto Darkening Helmet (2 lbs.)
Rated Electrical Input: 210-240 VAC; 50-60Hz; 22AMP
Max Voltage at No Load: 20 V DC
Rated Duty Cycle:130A@30% duty cycle
Wire Feed Rate: 4.9 Ft/min – 39.3 Ft/min
Wire Sizes: 0.025”(0.6mm) – 0.030”(0.8mm) mig wire 0.030”(0.8mm) – 0.035” Flux core wire
Welding Wire Spool: 4” and 8” spool
Weight: 62.0Lbs (24.5kg)
Overall Dimensions: 24.4 (620mm) x 12.6” (320mm) x 16.9 (430mm)
Always wear a minimum #10 shade helmet, leather welding gloves, long-sleeve shirt and long pants.
3-year manufacturer's warranty.
Accessories & Consumables
Customers also viewed:
5 contact tips 0.025 work with 0.023" MIG or flux core wireOnly $5.99
Watch this DVD to take the intimidation out of MIG weldingOnly $39.99
Speed through prep work for welding or paintingOnly $39.99