503 Service Unavailable

Error 503 Service Unavailable

Service Unavailable

Guru Meditation:

XID: 1014950989

Varnish cache server

  • Home
  • Eastwood MIG Welder 135 Amp
Eastwood MIG Welder 135 Amp is rated 4.713 out of 5 by 223.
Rated 5 out of 5 by from Incredible little machine I purchased the 135 mig a month ago, and I'm very impressed with its performance! I've welded for 25yrs, with almost every brand of mig available in the USA, and I'm impressed! I welded with it for over an hour solid, on high, on 1/4" mild steel, flat, vertical, and overhead, and never did reach its duty cycle nor did it hit temp overload. Has a great sizzling sound, lays beautiful beads, just overall does wonderful! Only drawback is, the description says it welds up to 1/4", and it will, it just won't penetrate well on 1/4". I'd be safe to say its limit is 3/16", but for the price, I'm not complaining at all! Worth every penny, period!
Date published: 2014-12-23
Rated 5 out of 5 by from Great Price Haven't used the welder yet so I will only review the over look, feel of the welder and price. I got this welder on sale for 279.99 with free shipping. Shipping was quick, then again I live in NJ and Eastwood is in PA. The box it came in was pretty sturdy. Very Heavy, usually a good indication of quality. Well packed for something that big. When I got the welder out I was pretty impressed. The welder is designed very well, the case is a thick material not cheap flimsy metal. with the lifted side panel open it will show how clean inside the machine is, no cluttering or sloppy wiring. Hope to use it soon.
Date published: 2012-12-10
Rated 1 out of 5 by from Horrible When I first received the mig 135 the wire feed didn't work. Set me back on a project. Got the new motor in a week. The motor fed wire well. I didn't have time to mess with anything else. Finally 3 weeks later I had time set aside to weld up my bumper... Well it doesn't work. Temp control does nothing. Even on highest setting it won't burn through 1/8 metal. Waiting to see if they make tis right but do to my work schedule it will be another month till I have time to work on it.. 2 months to build a bumper... Hours of my time wasted... Thank you eastwood!
Date published: 2013-09-30
Rated 5 out of 5 by from Great Welder! Great Price I just purchased this welder and powered it up with the gas setup. First thing I noticed was the overall quality of this unit. I have been welding for over 25 years and have been employed as a welding instructor with several vocational welding schools over the years. We primarily used Lincoln welders which are primarily industry standard. I was impressed with the weld quality and capabilities of the 135 especially running from a 110v power supply. The photos show my first use of the Eastwood 135 without really dialing it in...
Date published: 2015-01-09
Rated 5 out of 5 by from Great Customer Service I don't know how to weld so I bought this welder to learn after being recommended to me by someone that welds all the time with this machine. It worked out of the box but since I don't weld I cannot give an honest assessment of its abilities. It was a little difficult to get the wire fed but I finally got it. What I really want to compliment is the customer service. Since I had left the gas bottle open for a couple of months without using it I thought all of the gas had leaked out. Turns out the gauges were bad and not letting gas through. I called Eastwood and told them the problem and had new gauges in about 4 days with no hassle or problem. I can't ask for better service than that.
Date published: 2014-10-01
Rated 5 out of 5 by from Great machine I purchased the welder for myself for Christmas last year. Finally got to use it yesterday. I had to fab up a bracket to mount a wireless point to an IBeam in the service dept. of the dealership I work at. I used .030 flux core wire (no gas) and welded some mild steel angle iron. Set the dials pretty much where I thought was a good starting point and never looked back. This machine laid down a beautiful bead the first time. I have used several big name brands in the past (including the one we own at the shop) that did not work as well as this one. This was money well spent. Ben
Date published: 2011-04-10
Rated 5 out of 5 by from I'm An Eastwood Guy! When I started my search to finally get myself a MIG welder I had never heard of Eastwood until I read a review In Popular Mechanics magazine, so I jumped on the website and continued my research only to come back and purchase the MIG 135, and I could not have made a better choice for my needs. This is an awesome welder and an incredible value! The ability to "dial in" this welder is a great feature that can make a novice better in short time. I have not had the welder long enough to speak to reliability over time, but you can bet that I will report back about any issues; but in the meantime I'm loving everything about this little welder.
Date published: 2015-01-08
Rated 2 out of 5 by from Defective The welder I received from Eastwood was defective out of the box. The wire feed didn't work. I called Eastwood and they agreed to ship me a new one, but failed to mention that they were backordered. I have a project waiting on a welder, so I cancelled the order and they refunded the welder price, but not the shipping, so I'm out the shipping costs and have nothing to show for it except a couple of wasted weeks. Thanks Eastwood.
Date published: 2010-10-25
Rated 5 out of 5 by from Good quality mig welder I'm quite impressed with this mig welder, when I took it out of the box the first thing I noticed was the great build quality of the unit. It has an unlimited wire speed and voltage setting capability which came quite in handy while I was using flux-core wire to weld an art project. I was able to get the voltage and wire speed right where I wanted it. I was considering buying a Lincoln but to be frank, your paying that extra 2-3 hundred bucks for the brand name, an Eastwood will weld just as fine as a Lincoln. I chose an Eastwood welder because the build quality was good and it was at a reasonable price let alone the THREE year warranty on this bad boy.
Date published: 2013-08-17
Rated 3 out of 5 by from Poor build quality Received welder with circuit board tray broken where 2 mount screws are supposed to go in from outside of the welder cover. Customer service nicely sent for the broken welder and sent me another welder to replace it. The second welder had the same issue as above, but only 1 screw hole was completely gone and the other was cracked. Also, the fan electronics metal mount was not secured, just dangling there by the wires. I gave up and got a refund after that. I never got to try either welder since they were both broken at the factory and put in the box anyway.
Date published: 2012-06-29
Rated 4 out of 5 by from Excellent price for this welder Recently purchased the Eastwood 135 mig welder and found it to be of equal quality or better to the Hobart and Lincoln migs of the same class. I have used both the Lincoln and Hobart at work and I feel the weld quality of this machine is just as good as the Lincoln and better than the Hobart. I only found a couple of things that could be improved, one being the drive motor is quite noisy and the other is the pressure roller arm is made of plastic. The only other item that needs addressed is the chart for setting wire speed and voltage does not cover. 030 fluxcore wire settings. All in all I would say that this is an excellent performing machine for the money.
Date published: 2013-03-08
Rated 1 out of 5 by from Unhappy customer Welder will not feed. Wire feed opening in unit competely off center. Hose opening where the wire feeds does not come close to being in line with the feed hole in the unit. Will be returning and not looking to replaceng this Eastwood welder. Quality control has opportunities for improvement.
Date published: 2012-11-26
Rated 5 out of 5 by from Legendary quality. I bought after reading many reviews. Man am I glad I did. I have used the fire out of Lincolns and esabs for last 13 years. How in the world Eastwood can put out this kind of quality For such a silly low price will never be figured out by me. All I can say is that I am a raving fan. If anyone ever talks to me about a welding machine, I will not permit them to buy anything but Eastwood. I've been married for 46 years and now for the first time I truly do have a second love affair with this welder. God bless the bunch at Eastwood.
Date published: 2014-11-04
Rated 4 out of 5 by from Great Product The product appears to be of great quality, but time will tell how well it performs. Straight out of box it seems to be a winner. So far the only complaint is the fact there is no instructions included that show the actual attaching of the ground cable or the welding cable. You have to figure it out by yourself or stop what your doing, go home and watch the video on the website. For a novice I can see this being a little bit of problem. I could not find out prior to ordering but after it arrived I also found out it is made in China. But again so far it really welds like advertised. Was on back order forever.
Date published: 2011-02-16
Rated 5 out of 5 by from awesome welder Had this welder for a couple days now and have welded with it every day since I got it on everything from sheet metal to roll cage tubing and love it. I am not an expert welder but it is easy to make nice strong welds with this unit. It will weld just as good and almost as fast as my hobart 220 unit at less than half the cost. This is a great welder for around the house projects for beginners and experienced welders alike. My only complaint is that cheesy face mask that comes with it. Expect to buy a good welding helmet to get started but with the money you save on this unit that shouldnt be a problem.
Date published: 2011-08-07
Rated 5 out of 5 by from Awesome Welder for the Cost I, like some, fell victim to the DOA drive motor. I must say Eastwood’s customer service handled the issue promptly and professionally and soon, I had a replacement welder at my door step. This little 110V welder surprised me. I ran a few tests on some 1/8” stock (.023 wire with C25) and had no problems with penetration. The resulting welds where strong and the joints bent without breaking when subjected to the sledgehammer treatment. Overall, this is a great little welder and you can’t beat the price. I primarily got this for automotive body work and I believe it will be perfect for my needs.
Date published: 2014-03-22
Rated 5 out of 5 by from Great Welder I bought the 135 last winter because of the really good price and good reviews. I started setting it up, but it was just too cold to weld in the garage, so it sat. I finally had some welding to do this past week and finished setting it up according to the manual which had very good directions. What a nice machine!! This is my first MIG welder. I have a Lincoln stick and wire welders and have been welding off and on for 50 years. This MIG welder welds soooo nice! I am super pleased with it. Buy one you won't regret it.
Date published: 2014-06-09
Rated 5 out of 5 by from Great little Machine This machine performs very well and very east to use. The price point is very afforable, now with that cheap of a price and the weld quality it give the machine has to lack somewheres and thats the face plat it's plasic. Now that's only the face plate who cares with the indefinate knobs setting this machine to the exact heat and wire feed is alot better then some of the big named companies out there. We had a issue with credit card it went through twice but they are by far the best company to deal with when it comes to customer service. WOW, is all I can say to their customer service team by far the best I've ever delt with. Can't wait to do buisness again with them. Awesome company keep it up.
Date published: 2013-02-20
Rated 3 out of 5 by from Good but needs better quality I bought this welder with the package deal on the grinder. Overall the welder works good but I was disappointed that straight out of the box it was broken. The plastic insert for the door had broken off sometime between assembly and delivery. The spool rell also feel out the first time I used it. I guess I should have check that it was tight. So far so good but quality could be better.
Date published: 2011-05-12
Rated 4 out of 5 by from Not bad for a little guy I have not welded in a several years, and now I have started a new Toyota FJ45 rebuild project. I use to own a Miller Mig welder, and love them but cost was an issue. Lots of body work to be done on the PU box. All I had at the time was the good old stick welder, and that's not going to do the sheet metal work I have to do so looked into a small but reliable Mig welder and came across the Eastwood Mig 135. All I can say is from the five minutes of adjustments I did with the controls and a few test runs I was welding grate welds just as I had done with my Miller. This machine is not high end as some of the big names but it holds its own. With proper use and care it should last a long time in the shop.
Date published: 2012-03-14
Rated 3 out of 5 by from broken out of the box I have stick welded for many years and am looking forward to MIG. Videos and price sold me on Eastwood's MIG 135 over Chicago Electric and Hobart brands. I ordered on Friday and it showed up the next day - FANTASTIC service!! Unfortunately the unit they shipped me was dead on arrival. The highest voltage setting it barely causes a spark. The wire turns red hot and but it doesn't weld. Yes, the electrical and gas connections are all correct - it's really pretty simple and would be difficult to mess up. I left a voice message for tech support but I don't blame them for not calling me back on the weekend. I'll deal with it tomorrow, on Monday. I'm sure Eastwood will make it right, it's just very disappointing - especially for my 16 yr. old son who had his first MIG project all ready to go. If I have to pay return shipping on to get this corpse back to Pottstown, I guarantee there will be sparks flying then!
Date published: 2012-03-25
Rated 1 out of 5 by from Good Value for Price and Quality So far so good! Shopped around and this unit seemed best value for features, quality, price. Best features: Infinite power & speed controls Cable-hose length Gas valve & pressure gauge decent quality. Amps for 120 volt model. I think is is very good value. I never welded B-4. Just used this a little so far and I found it very easy to MIG with gas. Welded some decorative coat hooks from horse shoes. I will use it more w/ flux core wire sicne I want to weld thicker steel, but I chose 120 volt model for more portability. I went on YouTube learned basics for welding.
Date published: 2011-12-29
Rated 5 out of 5 by from First Welder - couldn't be happier I bought this MIG to continue work on my project car, making a few frame repairs and welding in floors and body panels. As a first time welder, I didn't have any problems setting it up and was able to begin welding almost right out of the box (with the exception of buying a gas bottle). I did about 150 plug welds and had it down after about the 10th one or so. Beads will take a little more practice, but I am happy with the 135. I tried it out on my roll cage tubing (.120 wall) and the penetration was good and it should make some really nice welds. Highly recommended.
Date published: 2014-10-10
Rated 5 out of 5 by from Good low end welder I bought the MIG 135 after reading lots of reviews of various welders, and enough people had success with this, along with the price point, I decided to give it a try. I just completed my first welding project with it, and I must say I am very pleased. I was welding on a car project with .125" plate steel (off road reinforcements), and it handled the job with ease. The table on the inside for power and feed speed are quite accurate based on some test welds I did before welding on the car. For the price, I don't think you can beat this handy little MIG welder.
Date published: 2014-03-20
Rated 5 out of 5 by from Just what I needed I have been looking to purchase a mig welder for a while. I spent many hours reseaching product features,price and support. Then I remembered the Eastwood Co and found the Mig 135 welder. After researching the web and using the savings source code the order was place. When the welder arrived it was packaged very well. Setting up the welder took only a few minutes to do. The detailed instructions were easy to follow. The infinite setting for Temp and Wire speed are a great feature when you need a little more or less. This is a great welder for any DIY projects
Date published: 2015-01-17
Rated 5 out of 5 by from This is an excellent welder at a great price I just finished taking a mig welding class where I learned on a Millermatic 140 autoset. I used my new Eastwood 135 for the first time yesterday and it was most impressive. Once I got my temp and speed adjusted where I wanted, this welder preformed as well if not better than the Miller I had been using in school. I cant speak to its longevity as I've only got two hours on it at the moment but initially this is an unbeatable welder for the price. I would definitely recommend this welder with a tank of argon/co2 to anyone. I could not be more pleased with it.
Date published: 2014-05-13
Rated 5 out of 5 by from Use the gas I got this welder for Christmas after trying to go cheap with a Harbor Freight flux core unit. I held off on getting a gas bottle and tried the Flux core for a while and was getting decent welds. This weekend I finally got to the gas store and got a bottle of C25 and got it hooked up and tried out. The difference is night and day. With the gas i can see the bead clearly and get a nice looking bead all the way. A nice uniform sizzle sound and very few burn throughs on sheet metal. My confidence has soared and am ready to tackle the patch on my fender.
Date published: 2011-04-27
Rated 5 out of 5 by from Great value just received my new 135 mig today, and I must say I was impressed. I weld everyday for a living, and restore Mopar muscle for a hobby, I was looking for a small welder for my shop, and was a little apprehensive on buying a welder in this price category. After setting it up I put it through the paces, and I was more then impressed, this welder is way nicer then I expected! With a little practice anyone can weld with this welder, easy controls, and great penetration , welds as good, or better then some of the more expensive welders I have used!
Date published: 2012-11-20
Rated 2 out of 5 by from Buyers remorse. Bought this about a year ago after a lot of research. I was a little nervous buying a "budget" welder but went for it. It worked good until today. The wire feed stopped working suddenly. Leaving me high and dry in the middle of a project I spent all day prepping for. I wish I would've spent the extra money on a better welder. I guess we will see what happens if I ever hear back from tech support.....
Date published: 2014-11-19
Rated 5 out of 5 by from Makes welding easy !!! I'm 71 and never used a mig welder w/gas in my life. Never had anything to weld thin metal and wanted to do some rust repair on my truck. Two days after ordering the welder was on my front porch but I didn't have the time try it out till today. But in the meantime I picked up a tank and traded it in for a full one and watched the Eastwood instructional videos (which are great). So this morning I plugged her into my generator and I couldn't believe how smooth this machine is. After tweeking the variable adjustments spot welding and running a nice bead was a breeze. I would highly recommend this machine to anyone and already don't know how I did without it. For price and warranty it's hard to beat. With this machine welding is a piece of cake !!!
Date published: 2014-12-14
  • 2015-03-01T09:59CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_2, bvpage2n
  • co_hasreviews, tv_0, tr_223
  • loc_en_US, sid_12011, PRD, sort_relevancy
  • clientName_eastwood

Mig 135.What is the  Welding thickness using gas and solid wire 30.0 I need to weld up a truck frame

Asked by: 59apacheman
The MIG 135 will handle up to 1/4" steel.
Answered by: MikeL
Date published: 2015-01-05

Flux Cored 0.030-0.035in (0.8-0.9mm)this is from the specs ^^^ i already ordered the 135 mig welder...am i going to be able to run a .035 flux wire thru it?

Asked by: george h
I have been running .035 flux core since day one on the standard drive roller.
Answered by: 05rider
Date published: 2015-01-02

Do I need a different liner to use .035 flux core wire or just a different tip

Asked by: Dave81
You will only need to swap out the tip.
Answered by: SeanA
Date published: 2014-12-31

What wire is used for stainless MIG welding?

Asked by: Mike 51
Stainless Steel MIG Wire is used (note that there is different wire for different bases of stainless steel). Generally, you want to set the polarity to DC+ and use a tri-mix shielding gas when MIG welding stainless.
Answered by: NickC
Date published: 2014-12-31

does the welder comes with a manual

Asked by: memo
Yes it includes instructions, troubleshooting, a manual, a welding list (for settings on the inside of the welding door) and a DVD to get you started
Answered by: SeanA
Date published: 2014-12-31

Does this welder have the ability to be connected to a 220V plug?

Asked by: TonyWelder
No, this unit is designed to run on a standard 120v/115v/110v circuit.
Answered by: MikeL
Date published: 2014-12-31

Is the Eastwood 135 a DC output welder?

Asked by: TPL437
Yes it is a DC, and also has capability of doing AC.
Answered by: SeanA
Date published: 2014-12-31

Can a Eastwood 135 with the proper spoolgun weld aluminuam ?

Asked by: Vino
Yes, the MIG 135 is compatible with the spool gun.
Answered by: MikeL
Date published: 2015-02-12

Where is this welder manufactured?

Asked by: Thryll
I asked this same question the other day about the mig 175/plasma 60 and the question was answered by an EW employee. He said all their welders were designed in USA by the in house R&D team, and were manufactured in China at the EW facility. Check the Q&A's on the mig 175/plasma60 and you should see my question and answer.
Answered by: chris24
Date published: 2015-01-23

What gas would we need? Pure argon or mix?

Asked by: Justin R
Eastwood recommends the use of 75% Argon / 25% CO2 for shielding gas when MIG welding Steel, and Tri-Mix (90% He / 7.5% Ar / 2.5% CO2) for Stainless Steel.
Answered by: NickC
Date published: 2014-12-30

There are a couple dozen countries contiguous to North, Central and South America, so "Overseas" as a manufacturing location leaves about 175 countries. I guess I should try again: In which country is this welder manufactured?

Asked by: Thryll
Answered by: SeanA
Date published: 2014-11-18

When using Flux cored wire do you need to have gas hooked up to it or can one run that without gas?

Asked by: ChetC
You don't need the gas when using flux core wire, it has its own gas built into the wire. Welds look better with normal wire with gas from a tank.
Answered by: themarcusgomez
Date published: 2014-12-30

why do i need a spool gun for aluminum. can't I use regular gun?

Asked by: yoder
Yes Aluminum is softer, and would bend and get tangled in the drive roller. If you try to run aluminum through a gun that used steel wire, you contaminate your wire, and your welds don't look good.
Answered by: themarcusgomez
Date published: 2015-01-19

Is the mig 135, flux core capable?

Asked by: yoder
Yes. It can run gas and flux
Answered by: SeanA
Date published: 2014-10-28

can this welder be use without gas (gasless)

Asked by: beginner242
Yes you can run flux through it.
Answered by: SeanA
Date published: 2014-10-28

Can you use 2lb AND 11lb wire rolls with this welder? So far, i have only used 2lb rolls... but i end up using them too quickly. I work at a paint and body shop.. fixing door skins, bed-sides, and all sorts of welding. Thanks for an AWESOME and welder.

Asked by: Josh Cook
The unit holds up to a 10LB spool
Answered by: SeanA
Date published: 2014-11-19

I did not see the duty cycle mentioned in the specs. Can you elaborate?  Thanks

Asked by: AdaL
Welder has a 20% duty cycle at 90 amps, and 25-135-amp welding range. Here is a video that we explain duty cycles. https://www.youtube.com/watch?v=XhWwDoythac
Answered by: NickC
Date published: 2014-11-04

What is included in the package?

Asked by: caed12
Contents MIG 135 Welder 0.023" Steel MIG Wire Extra 0.023" Contact Tip Gas Regulator with hose Tweco-Style Gun and Consumables Switchable Drive Roller 8' Ground Cable and Gun Cable Wire Brush Welding Face Shield 3-Year “No Hassle” Warranty
Answered by: NickC
Date published: 2014-11-04

Does the 135 come with a helmet?

Asked by: Dicky
No, a helmet would need to be purchased separately
Answered by: SeanA
Date published: 2014-10-17

Is this welder voltage rheostat controlled , or are there a set number of settings?

Asked by: walrathgary
The amperage control on our MIG welders is infinitely adjustable, not a predetermined set of power levels.
Answered by: MikeL
Date published: 2014-10-11

Could the 135 be used to weld classic car patch panels on my restoration project?

Asked by: Mike55707
Yes, the MIG 135 is perfect for patch panels! It will handle both mild and stainless steel, from 24-ga. to 1/4" with no problems.
Answered by: MikeL
Date published: 2014-11-19

Can the 135 be used to weld classic car patch panels on my restoration project?

Asked by: Mike55707
The MIG 135 is great for welding sheet metal patch panels on classic cars. It can handle 24 gauge to 1'4".
Answered by: NickC
Date published: 2014-09-24

When the power switch is on, is the welding wire always electrically hot or is it switched with the trigger?

Asked by: RickS
The wire is not electrically hot unless the trigger is pressed.
Answered by: MikeL
Date published: 2014-10-04

Spool gun #13898 says that it is for the MIG 175. Can anyone confirm that it fits the 135?

Asked by: Joe D
The spool gun will fit MIG 135 welders with the metal connection plug on the front of the machine.
Answered by: NickC
Date published: 2014-10-16

Can a spool gun be added to this welder?

Asked by: 1968JCode
Eastwood 13898 Spool Gun can be added to the MIG 135.
Answered by: NickC
Date published: 2014-10-16

Can this welder be used to weld aluminum ?

Asked by: Joe S
With a spool gun (#13898) and 100% Argon, the MIG 135 can weld aluminum.
Answered by: NickC
Date published: 2014-12-22

Will this weld Chromoly?

Asked by: Bros

Do you need a different spool for flux core wire? Some reviews say yes.

Asked by: bugman

Can i use any other tips like miller on the 135

Asked by: stuart53

is the mig 135 an inverter powered welder?

Asked by: pierre32408
  • 2015-02-28T09:59CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_39
  • loc_en_US, sid_12011, PRD, sort_recentAnswersFirst
  • clientName_eastwood

Eastwood MIG Welder 135 Amp

Item #12011 Brand: Eastwood

25-135-amp, industrial-quality, MIG 135 Welder, 120v -- low DIY price!
Heavy Item - Special shipping charges may apply.


Eastwood's own MIG 135 Welder: as good as the "name brands", but at a fraction of the price!

As a home hobbyist or light fabricator, you don't need to spend more for a "brand name" industrial MIG welder. Our R&D guys developed the Eastwood MIG 135 Welder from scratch to produce excellent bead quality and capabilities that match—and even exceed—the more expensive MIG welders for sale!

  • Welds mild and stainless steel, 24-ga. to 1/4"
  • 25-135-amp welding range
  • Tweco-Style Gun and Consumables
  • Powered by standard 120v household current
  • Ships with regulator and hose for MIG welding. Can also be used for Flux-Core welding.
  • Compare to similar welders that sell for over $500
  • Backed by Eastwood's no-hassle return policy and 3-year warranty. Try it out for 60 days and if you don't like it, return it for a full refund!

More info...

About Eastwood MIG Welder 135 Amp

MIG 135 welder is designed for the home hobbyist and light fabricator. Welder comes complete (except for the gas cylinder) and ready to weld 24-gauge to 1/4" mild steel and stainless. Welder has a 20% duty cycle at 90 amps, and 25-135-amp welding range. Feeds wire at 39"-468" per minute, and has infinitely adjustable wire speed and heat settings. Includes a precision-drive motor, regulator with hose, wire, tips and other MIG welding equipment...just add your own cylinder of CO2/Argon. "Quick Set" weld chart specifies settings for each material thickness, eliminating guesswork and assuring complete penetration and flawless welds. Backed by Eastwood's no-hassle 60 day return policy and a 3-year manufacturer's warranty.

Click here for warranty information


MIG 135 Welder (57 lbs.)
0.023" Steel MIG Wire
Extra 0.023" Contact Tip
Gas Regulator with hose
Tweco-Style Gun and Consumables
Switchable Drive Roller
8' Ground Cable and Gun Cable
Wire Brush
Welding Face Shield
3-Year “No Hassle” Warranty


Output Amperage Range: 25-135 A
Maximum Output No Load Voltage: 28 V DC
Maximum Input Amperage: 20 Amp
Input Voltage: 120 VAC 60 Hz
Rated Duty Cycle: 20% @ 90 A
Wire Feed Rate: 40-450 IPM
Welding Wire Spool Sizes: 4-8 in
Weight: 56 Lbs. (25kg)
Overall Dimensions: 16.5” (408 mm) x 9.6” (244 mm) x 14.5” (367 mm)
Wire Type & Diameter: Solid 0.023-0.030in (0.6-0.8mm), Stainless 0.023-0.030in (0.6-0.8mm), Flux Cored 0.030-0.035in (0.8-0.9mm)


Click here for Welder settings chart


Always wear a minimum #10 shade helmet, leather welding gloves, long-sleeve shirt and long pants.


Click here for warranty info


Click here for product instructions

Welding steel, stainless metals: this unit welds 20- and 18-gauge body panels beautifully. The amperage and output voltage can be controlled precisely to get the proper penetration required. The wire speed can be infinitely adjusted also to gain proper wire fill in the weld pool. This unit has been compared to the leading U.S.-manufactured red welders with equal results at a fraction of the cost. The drive roll mechanism, the heart of any MIG welder, is designed to our specifications and delivers flawless wire feed without skipping or slipping on the wire.

Accessories & Consumables

Replacement Parts
12211 Contact Tip 0.023
12224 Contact Tip 0.030
12226 MIG Wire 0.023
12227 MIG Wire 0.030
12225 Flux Wire 0.030
12239 Drive Roller
12210 Tweco-Style Nozzle

TIG Welding Cart
Auto Darkening Welding Helmet
Welding Jacket
Large View Auto Darkening Helmet
Welding Gloves

Contact Tip, 0.023 Inch
Contact Tip, .030 Inch
MIG Wire, 0.023 Inch
MIG Wire, .030 Inch
Flux Cored Wire 0.030 Inch
MIG Nozzle

Customers also viewed: