• Home
  • Eastwood MIG Welder 175 Amp with Spool Gun
Eastwood MIG Welder 175 Amp with Spool Gun is rated 4.6087 out of 5 by 115.
Rated 2 out of 5 by from More problems with second unit I am really not pleased with this Mig 175. The first unit had the following problems, bad gauge (replaced), blew a hose (replaced), face plate peeled off (replaced) wouldn't regulate voltage (unit replaced). Unit was replaced, second unit, crossed threaded tip (trigger and hose replaced), broken internal gas fitting behind drive motor, same problem that Mike had in his review and I think it is a fatal flaw in the design (motor drive unit replaced) and now the gas won't shut off unless I turn the unit off. I sound like the customer from hell, I really just want to be able to use the welder for more than a day without problems. So two units with a total of 7 issues, will the it ever work???????????
Date published: 2014-04-28
Rated 1 out of 5 by from It's not worth it Well all I got to say is go put your money into a well known brand named welder and you will be very happy with it knowing that it will always work unlike this one I got but retuned it for my money back because I went through 3 of these welder with in less than a year. Reason why is the gas selonoid will not work like how its really suppose to. Besides when you get the package it says on the side something like manufacture in CHINA. So yeah it China made quality stuff. Well learn a lesson for me and how it willfor some of you guy thinking about getting this welder. Go spend that extra money on a miller or linclon and you will be one happy person. Got me a linclon welder coming in at airgas.
Date published: 2015-01-02
Rated 5 out of 5 by from Good machine great price I'm very pleased with this setup, the capacity for the price is awesome. I used the spool gun basically first thing. It doesn't show it in the pictures or under description but my spool gun had a 4" spool of 4043 wire already in it. The settings for the aluminum welding seem about right which is surprisingly fast metal deposition. The only gripe I have is the included "welding mask". Eastwood shouldn't even bother, just add in the specifics that the purchaser will need to purchase a proper welding helmet before use.
Date published: 2014-05-12
Rated 4 out of 5 by from Good welder when working but had a few issues Great welder if I could depend on it. I've had three separate issues all replaced under warranty. First issue was the feed motor would sometims not work and sounded like a relay tripping internally. Entire welder replaced. Second issue:The nipple on the plastic housing that attaches internally to shielding gas broke. Part was replaced. Third issue: the plastic housing holding the feeder hose broke causing shielding gas to escape. Unit being replaced again.
Date published: 2014-10-11
Rated 5 out of 5 by from Efficient, Reliable and Portable This is a great welder! The compact design makes the welder an asset for off site work provided the power supply is available. It does the job of much more bulkier and heavier welders. The efficiency is superb, excellent penetration with the ability to perform a full range of welding styles on various type metals with little or no stand-by. The duty cycle allows for pretty much continuous welding with little effort for most automotive applications. The added ability to handle aluminum is an included feature not available (except at an added cost) with other machines.
Date published: 2010-06-03
Rated 5 out of 5 by from No regrets I am a rookie welder and have been using a very seasoned Linde MIG welder on my '59 Chevy truck project. Amazing what late model MIG technology can produce for the price. Could not justify spending 2 to 3 times the cost to buy a brand name welder so, after reading the reviews, decided on the 175. Would recommend to anyone. The only issue I have had with the unit is that the door comes off the hinges every time I open it. Called Eastwood's customer support and they immediately emailed me back and even called me. A new set of hinges is being Fed Ex'd to me now.
Date published: 2013-04-19
Rated 5 out of 5 by from Great Value... Bought the MIG 175 and Versacut 40 package and you really can't be this package for the price. I've been taxing the MIG 175 with a roll cage I'm installing in my race car and it is handling the task with ease. The plasma cutter has also been used a lot but not quite as much as the welder. But, every time I ask for it to cut, it does its job. No issues...yet. The only cons I'veI noticed were that one of the contacts for the trigger connection had to be pulled out a little bit as it had fallen back due to being loose and the air regulator is a little chinsy
Date published: 2013-07-13
Rated 5 out of 5 by from excellent welder I've had my welder for 6 months now and I'm very pleased with it. Some people complain about lousy fitment of the front plastic and some other small things. They may be right about that, but I'm not taking my welder to shows. This thing performs flawlessly. You may want to buy a pack of Lincoln tips though. Originals melted easily. I haven't had any problems since I put in the Lincoln tip. What an improvement over my old MIG. I highly recommend this welder for anyone looking for an affordable welder.
Date published: 2012-06-07
Rated 5 out of 5 by from Don"t wait, buy now, you'll be happy. I waited to write this until after I had the unit a couple of months. I do hobby welding and had borrowed a friends Lincoln for much longer than I should have because I fell in love with that unit. After reading these reviews I decided to purchase the Eastwood 175. I'm glad I did because this unit welds as good as a Lincoln or Miller unit and I couldn't be happier. 2 weeks before I bought this one my buddy purchased the Miller AS180 with Spool Gun and gave twice what I paid for the Eastwood, which welds just as good. I'll be buying more Eastwood products.
Date published: 2013-05-08
Rated 4 out of 5 by from MIG 175, Great product Recently purchased a MIG 175 welder for a car fabrication project. Easy to set up (works better with shield gas instead of flux core wire) with a little practice I could produce a good quality weld. A nice feature of this welder is the adjustability of the weld voltage and wire speed. You can "fine tune" the welder to produce a good weld with little difficulty. Overall the MIG 175 is a good bang for your buck.
Date published: 2012-07-19
Rated 4 out of 5 by from The MIG welder is OK but the Customer Service is Outstanding. This welder had to be returned after only 1 hr of use, however the company replaced the unit within three days. The customer service representative was very helpful. The replacement had a gas leak, once reported the service department sent repair parts and after I installed them it fixed the leak. The welder is finally working to my expectations. The MIG welder is OK and the Customer Service is Outstanding.
Date published: 2014-06-01
Rated 5 out of 5 by from Very well built true value I put a lot of faith in Eastwood. I tell people Eastwood very seldom brings a product to market without the bugs being worked out. I am well pleased with the unit itself. My only negatives are niggling little things. Ithink the manual needs to be rewritten. When I compare it to the manual for the Lincoln that it replaced it is barely adequate. I can envision someone who had little or no experience with MIG welders getting lost. The only other complaint I would have is why even bother including such s cheap shield I can't imagine anyone trying to use it,
Date published: 2011-08-18
Rated 5 out of 5 by from This works better than... First off, I want to compliment the excellent customer service. I decided to call rather than place my order online. This was on Thursday afternoon, (pacific daylight saving time), I received my welder, sometime during the day, on the following Monday! The delivery company hid it on my front porch. We have 2 professional welding contractors at my company. They took the time to take it out of the box and set it up. They were totally blown away as to how well the 175 works. I have never used a wire feed mig welder myself until today. This machine even makes me look like I know what I'm doing! They messed with the settings and were able to perform a T-joint with 1/2 mild steel using the .030" wire. I was able to do the same with 3/8 steel, which I received compliments from the guys. WOW! This comes with everything you need except the 75/25 inert gas, helmet, gloves, mig pliers, and suggestions for projects...you are on you own for the last one. Have fun!
Date published: 2014-10-10
Rated 4 out of 5 by from Eastwood 175 Mig welder I purchased this unit on Ebay thru Eastwood because of the Holiday Deal and after setting it up and getting my gas bottles I must say this welder is GREAT!. I had a 90amp mig welder that Ive used for small projects and decided to get rid if it and get into the bigger stuff. Over the weekend I fabricated a dry-sweep roller stand using the 175 and didn't once blow thru the 14ga steel of the frame or the 20ga steel of the wheels!!!. This welder made some nice spot welds that I haven't been able to do with my previous welder. I am very happy with my purchase and don't think a $1500.00 Miller 211 could've done a better job. So for those that are interested in working in your garage and need a mig that can handle anything you have in it, this Welder is for YOU!!!!!!
Date published: 2014-01-03
Rated 5 out of 5 by from Great Value This welder works as advertised; maybe better. I have welded 1/4" aluminum with great penetration. Voltage & speed controls that are infinitely variable are important features. I did have an issue with the spool gun; the drive ran backwards, that is the reason it did not get all 5 stars. A phone call to tech support gave me the option to replace the unit or fix it myself with there help. It was an easy fix and when I opened the case I was very impressed at how well this was put together. I wish it were made in the US but they would never be able to sell it at this price if it was.
Date published: 2014-01-07
Rated 3 out of 5 by from Unhappy Ok I gave a good review earlier but that was before the problems. Blown gas hose, bad regulator could happen to anyone. Then the machine would not stitch web on 18 gauge without blowing a hole through it. I was told it was the micro switch in the torch and they rushed a new torch to me. Installed the torch and it seemed to work fine on 3/16 metal. However it will not stitch weld 22 gauge metal without blowing a hole through it. Amperage is set at A the lowest level and I have tried numerous different wire speeds with no solution. It worked great doing this up until Dec. It is like I can't turn the amperage down as if the controls are stuck at a high amperage. I am totally frustrated with this machine, ready to go to Craigslist with it. Should have spent the extra cash on a name brand. :(
Date published: 2014-01-19
Rated 4 out of 5 by from Makes good welds What matters is the welder makes good welds. It's easy to use, and so far it has been reliable. The downside is the cart is flimsy and poorly designed. If I could go back I would buy the welder alone and then use it to build a good cart. The welder has an overall feel of low quality. Like the rubber isn't as strong/thick, some other parts just aren't up to par with the miller/lincoln welders. But I have used miller and lincoln welders and it is just as easy to use and makes just as good or better welds. For the price it is UNBEATABLE. Trust me I did a lot of research. The spool gun has the same cheap feel but it works great for fixing my aluminum sprinkler pipe and I have had no problems so far (it takes some practice to weld aluminum though). Great overall I would and have recommended to others and they also agree. Gets fairly heavy use on a 500 acre farm and no real problems so far after two years. The price with spool gun is amazing. It uses same disposable parts as lincoln mig welder I believe (they have the parts at local hardware stores.) I never write reviews but thought I would cause this was a great buy.
Date published: 2013-02-01
Rated 4 out of 5 by from Great welder I bought the Eastwood 175 and I absolutely love it. I had a problem with the gas solenoid they replaced the machine with a brand new machine never had another problem thanks Eastwood
Date published: 2015-01-27
Rated 2 out of 5 by from Questions Eastwood has been a great company to work with and I purchased the mig 175 and the plasma cutter. This review is for the Mig 175 and from day one I had the gas continue to exit the gun for a little over 1 second after releasing the trigger. I called customer service and they told me this was to cool the metal. Sounded reasonable but after more reviews and watching the you tube video I don't see there or anyone else having this issue. I want to control my welds by spot welding in quick burst but the gas would continue to run. So I have a email to customer support to see if there is something wrong with my machine or if this is a item they have. My father has a Hobart Mig and his gas shuts off as soon as you release the trigger and I'd except this to do the same. I am hoping they will find me a remedy. If this gas will shut off I'd give them high stars but after burning through a tank of argon I'm looking to keep as much gas for welding in the tank as possible.
Date published: 2014-02-10
Rated 3 out of 5 by from Excellent Customer Service My welder arrived damaged. Called and a agent was very courteous and immediately shipped another and made arrangements to pick up damaged welder. Was happy with the welder but more happy with the service I received.
Date published: 2010-06-03
Rated 4 out of 5 by from out of box, first impression Fist of all the glass lens with the cheep welding shield was broken upon unpacking. Next the side cover doesn't latch.The front was not bent to 90 degrees. Third the electrical cable connector for the gun is missmolded for the strain relief. Looks like a molded mess on the end. haven't welded with it yet, but look forward to trying it out. I also pursed a plasma cutter and have the same problem with the strain relief.
Date published: 2011-03-10
Rated 5 out of 5 by from finally got to use the MIG 175 the unit worked great . the infinitely adjustable heat settings make it easy to fine tune the weld . I assembled the cart as instructed but before I put the unit on the shelf , while I was threading the wire thru the whip I took a picture of the chart with my digital camera and made an 8x10 of it and put it in a zip lock bag. the only inconvenience is when I have to change wire or major settings . weld quality is on par with the suitcase millers we used at the local shipyard I worked at before I retired . I would recomend this unit to anyone .
Date published: 2013-09-12
Rated 5 out of 5 by from MIG 175 Welder with spool gun. Just picked up the 175, great little unit. Simple to use. I'm new to welding, but the 175 has welded some 3/16" steel plate for me pretty easily. I'm looking to do some 1/4" Aluminum in the near future. Check out my YouTube video, as you can contact me through there to give me some beginner tips, or any commets or concerns you may have. I will be posting update videos of the spool gun, and projects, so keep checking back. I do need to pick up a couple bottles of gas, but the unit has been up to any job I've thrown at it for the time being.
Date published: 2010-10-24
Rated 5 out of 5 by from Neat This welder is my first welder as well as my first attempt at welding. I set this up and read the recommended settings and laid my first tack welds. I was very happy not only because the machine works but because the metal stuck! This machine even convinced my wife she could weld so she tried it too. Yes, naturally hers looked better than mine (She might read this). Overall, I am very pleased with this purchase and the quality, I am going to buy the plasma cutter as well. Hopefully I can be as happy with that as I am with this welder.
Date published: 2012-07-06
Rated 4 out of 5 by from EXCELLENT CUSTOMER SERVICE I bought the Eastwood 175 on Monday and it was at my house Tuesday. I set it all up and found two small problems. The hose between the bottle and the machine was sliced at the crimp fitting, and the wire drive motor on its highest setting would feed at a high rate, then slow down after about 3 seconds of feed. I emailed them last night and someone from tech support called me at 10am this morning and they're sending a new drive motor and a new hose. I am very happy with their customer support. I hope this machine lasts many years.
Date published: 2015-01-07
Rated 5 out of 5 by from Awesome product I have shopped for quite some time for a new welder and have reviewed many name brand units but none gave this much value for the money. I have purchased two cheap aftermarket welders that would weld but produced low quality welds that required much grinding and cleanup. Glad I finally found the Eastwood mig and now I can finish welding my street rod with nice welds that will require much less cleanup. I received much more for my dollar than I expected. Now I also will buy other Eastwood products since I know they sell quality.
Date published: 2013-03-23
Rated 5 out of 5 by from Great First Welder Got my welder back in mid February but had not had a chance to try it out yet. I had been borrowing my sons Millermatic 210, which was my only experience on a welder. I LOVE the quality of welds I am getting. The only negative I will give it is the spool-gun. I could not get it to weed wire due to the wheel not being properly aligned. I bent it a bit and it feeds fine now. My son paid $1300ish for his and I got mine for $550 shipped (counting hf cart). I would put my welder just under his and a great buy for the money.
Date published: 2011-03-31
Rated 5 out of 5 by from Nice quality welder I bought this Eastwood MIG 175 for a few reasons. I wanted a quality welder that could do all the usual car, motorcycle home projects that I do. I also wanted to be able to weld aluminum and be 220v. I found the Eastwood welder by searching google. I read plenty of reviews and decided this is the one I want. It has all the features I wanted plus the price was right. So I ordered it. First thing this is heavy. I was used to my HF 90amp flux core welder. I just bought a welding gas bottle and started practicing yesterday. Wow is all I can say. The welds are so clean. I played with the wire speed control and the power level. Cool that it has infinite adjustment. I am glad I made this purchase. Now I need another bottle of 100% argon so I can do some aluminum welding.
Date published: 2014-11-19
Rated 5 out of 5 by from A+ I purchesed the Eastwood MIG Welder 175 Amp in December 2012 and decided to put some miles on it before giving a reveiw. After running 33+ lbs of wire through it in 10 months I am completly satisfied with it. The wire speed and heat controls are sensitive and work excellent. Also the 30% Duty Cycle has not shut down once.
Date published: 2013-10-13
Rated 1 out of 5 by from Sheilding gas connection I just recieved my welder yesterday. Amazed at how fast I got it btw. My immediate problem I'm having before even using it for the first ime is hooking up the sheilding gas. I have it on a MIG cart and I have the big bottle of gas that extends over the top of the welder. The gas inlet is directly in the center and towards the top of the machine. There is only about an inch of clearance between tth two. Found a 90 degree brass plumbing fititing but was told by a friend that works at a welding supply (BOC) that it's not compatible. So I ordered on from them for another $16.00 and they don't know when I'll get it. For now I guess I'll just set the bottle next to the unit so I can play with it. My previous welder had ia nipple with a plastic hose and clamp near the bottom amd on the left. You guys got a solution to this?
Date published: 2013-03-29
  • 2015-03-05T11:04CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_2, bvpage2n
  • co_hasreviews, tv_0, tr_115
  • loc_en_US, sid_12012, PRD, sort_relevancy
  • clientName_eastwood

What is the orientation of the blades on the power cord? I need to ensure the cord will plug into the 220v outlet in my garage

Asked by: Eddie262
It is a NEMA 6-50P plug, and it requires a NEMA 6-50R receptacle.
Answered by: MikeL
Date published: 2015-01-16

Is this machine a 3 wire or 4 wire plug?

Asked by: Gammz
It is a NEMA 6-50P plug on this welder, and it requires a NEMA 6-50R receptacle. The 6-50s are three wire.
Answered by: MikeL
Date published: 2015-02-18

no gas tank?

Asked by: Suzuki Bruce
No welder will come with the shielding gas tank. You will need to get a tank locally.
Answered by: MikeL
Date published: 2015-02-18

For very low power use and short duty cycle, can I use a step up transformer to run my 175 on a 110 volt outlet?

Asked by: Krash
unfortunately; the MIG 175 is not wired to run lower that 220V. Running the unit lower than 220 could result in damage to the unit.
Answered by: Ed O 88
Date published: 2014-12-24

Will the welder run fine with out damage if ac powered off a older welder/generator?

Asked by: ROCKLAND VALLEY FARM
The welder will work fine as long as the generator is making enough amps, with with correct breakers on it to keep up with the specs of the unit.
Answered by: SeanA
Date published: 2014-12-19

Can this lay consistent beads on thin auto metal? I see the more expensive units go down to 25 amps.

Asked by: SloMX5
The MIG 175 can easily be used on automotive sheet metal, but there would never be a situation where you would run a consistent bead on sheet metal. Even at low amperage, MIG welding does not offer enough control over heat in order to avoid warpage of the thin panels.
Answered by: MikeL
Date published: 2014-12-21

where can you get parts for the 175 mig welder

Asked by: geneo
We carry all parts directly related to the unit Consumables can be purchased through us or check with a local welding shop.
Answered by: SeanA
Date published: 2014-12-10

does this machine come with a HOW TO book?

Asked by: Popsy
It comes with a how too: DVD and the manual for the welder.
Answered by: SeanA
Date published: 2014-12-08

Where is the Eastwood MIG Welder 175 Amp welder made/manufactured?

Asked by: BuyMadeInUSA
It was designed here at Eastwood by our R&D team, it is made overseas in China by our private manufacture.
Answered by: SeanA
Date published: 2014-12-26

Do I still get the three year warranty if I buy this product from a distributor and when does it start 

Asked by: stangergt99
Yes you would still get the 3 year warranty and it starts as soon as it is purchased
Answered by: SeanA
Date published: 2014-12-07

Are Lincoln wire spools compatible with this welder?

Asked by: mike99712
Not sure what Sean was referring to here. the spools or reels of wire (2 or 12 lb mig solid wire or flux core) are exactly the same. You can buy and run Lincoln brand wire on the Eastwood!
Answered by: DelK
Date published: 2014-12-23

can i plug this welder 175 or the 200 directly into my garage outlet?? or do i need a step up converter/generator to run it safely. I need a helpful recommendation please.

Asked by: peteseta
You need to make sure you are running a 50 AMP breaker as well as a NEMA 6-50R
Answered by: SeanA
Date published: 2014-12-03

Is the drive system made of all metal , or meatal / plastic?

Asked by: Alex R
It is made of plastic
Answered by: SeanA
Date published: 2014-12-03

need mig 175 repaired wont feed wire continuasly spool gun works good

Asked by: ghost
Please feel free to contact the tech department for MIG issues.
Answered by: SeanA
Date published: 2014-12-03

Can this machine be used for stick welding as well? 

Asked by: Steve10
This welder can be used for MIG welding and flux cored welding. Our MIG/Stick 200 can be used for stick welding, as well as MIG. Here is a link to the MIG/Stick 200. http://www.eastwood.com/200-amp-mig-and-stick-welder.html
Answered by: NickC
Date published: 2014-12-03

Can I use flux cored wire?

Asked by: Jeepfreak
The MIG 175 can run solid wire or flux cored wire.
Answered by: NickC
Date published: 2014-12-03

When the unit is powered on, is the wire electrically hot when the trigger is not being pressed?  Or is it only hot when I press the trigger to feed the wire?

Asked by: JimBowilkes
No, it is not electrically hot until you press the trigger.
Answered by: MikeL
Date published: 2015-02-05

fig d and e 12012 shows blackplastic housing just inside on the bottom left, we need that black plastic housing that holds the devices that allow the gas to comethru the unit the black plastic 4 x 5 inches is broken where the gas line attaches inside so I

Asked by: nickname
Hello, I would recommend to call our customer service department and they will be able to take care of that for you. And get you out the correct item that you need.
Answered by: Ed O 88
Date published: 2014-09-15

Can you spray arc weld with this mig 175 unit?

Asked by: Fred DelRusso
The MIG 175 will not spray arc weld, but keep an eye on Eastwood in the near future.
Answered by: NickC
Date published: 2014-09-09

What is the start-up amp draw as well as the running amp draw? I would like to run this off a 5500 watt alternator w/ 6500 watt surge. has a 220-230 30-amp breaker.

Asked by: Roy the boy

How long is the power cable?

Asked by: krs004

If I have a generator that has a 30 amp 230v line. Could I run the 175 mig welder on that.

Asked by: Mmigatz

I already have a 30amp circuit running 10awg wire, can I just install a 6-50P socket and run off a 30 amp? is 50 amp with 6awg wire required.

Asked by: SloMX5

Can you provide the voltage output for each letter on the dial?  A= ?, B=? , C=?, and so on.. Thanks...Rob

Asked by: rbleistein
  • 2015-03-05T12:58CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_32
  • loc_en_US, sid_12012, PRD, sort_recentAnswersFirst
  • clientName_eastwood

Eastwood MIG Welder 175 Amp with Spool Gun

Item #12012 Brand: Eastwood

Industrial-quality MIG 175 welder includes a FREE Spool Gun
Heavy Item-Special shipping charges may apply.

Details

Eastwood's MIG 175 Welder: "high-end" features at a DIY price! As a professional or weekend enthusiast, you can now get industrial-quality features in a hard-workin', affordable, MIG welder! Our R&D guys designed the Eastwood MIG 175 Welder (12012) for steel and aluminum to produce excellent bead quality and capabilities that match—and even exceed—the more expensive other MIG welders for sale!

  • Welds mild and stainless steel, 24-ga. to 5/16"
  • Welds aluminum, 14-ga. to 1/4" with included FREE spool gun ($199.99 value!)
  • 30-175-amp welding range
  • Ships with regulator and hose for optimum MIG welding. Can also be used for Flux-Core welding.
  • Powered by 220v current
  • Compare to similar welders that sell for over $700
  • ETL Approved
  • Backed by Eastwood's no-hassle return policy and 3-year warranty. Try it out for 60 days and if you don't like it, return it for a full refund!

More info...

About Eastwood MIG Welder 175 Amp with Spool Gun

MIG 175 welder is designed for the professional or weekend enthusiast. The welder comes complete (except for the gas cylinder) and ready to weld 24-gauge to 5/16" mild steel and stainless, plus 14-ga. to 1/4" aluminum. This high-quality MIG welding machine has a 30% duty cycle at 135 amps, and 30-175-amp welding range. Feeds wire at 58"-471" per minute, and has infinitely adjustable wire speed and heat settings. Includes a precision-drive motor, regulator with hose, spool gun (to weld aluminum, 19-gauge to 1/4" plate), wire, tips and accessories...just add your own cylinder of CO2/Argon. "Quick Set" weld chart specifies settings for each material thickness, eliminating guesswork and assuring complete penetration. Backed by Eastwood's no-hassle 60 day return policy and a 3-year manufacturer's warranty.


Contents

MIG 175 Welder (89 lbs.)
Spool Gun with 9' cable (works with 2-lb. wire spools only)
MIG Wire 0.030
Aluminum Wire 0.030
Gas Regulator with hose
8' Ground Clamp
8' Gun Cable
3-Year “No Hassle” Warranty


Specs

Rated Electrical Input: 210-240 VAC; 50-60Hz; 22AMP
Max Voltage at No Load: 20 V DC
Rated Duty Cycle: 130A@30% duty cycle
Wire Feed Rate: 4.9 Ft/min – 39.3 Ft/min
Wire Sizes: 0.025”(0.6mm) – 0.030”(0.8mm) mig wire or 0.030”(0.8mm) – 0.035” Flux core wire
Welding Wire Spool: 4” and 8” spool
Weight: 62.0Lbs (24.5kg)
Overall Dimensions: 24.4 (620mm) x 12.6” (320mm) x 16.9 (430mm)


Setting Charts

Click here for welder setting chart


Safety

Always wear a minimum #10 shade helmet, leather welding gloves and long sleeve shirt and long pants.


Warranty

3-year manufacturer's warranty.

Click here for warranty information


Instructions

Click here for product instructions



Amperage and output voltage can be controlled precisely to get the proper penetration required. Wire speed can be infinitely adjusted to gain proper wire fill in the weld pool. This unit has been compared to the leading U.S.-manufactured red welders, with equivalent results at a fraction of the cost. The drive roll mechanism which is the heart of any MIG welder is designed to our specifications and delivers flawless wire feed without skipping or slipping on the wire.


Accessories & Consumables

Consumables:

12211 Contact Tip 0.023
12224 Contact Tip 0.030
12226 MIG Wire 0.023
12227 MIG Wire 0.030
12225 Flux Wire 0.030
12239 Drive Roller
12210 Tweco-Style Nozzle

Accessories:

Welding Cart
Auto Darkening Welding Helmet
Welding Jacket
Large View Auto Darkening Helmet
Welding Gloves


Customers also viewed: