• Home
  • MIG135 Knurled Drive Roller (Key Way Style)

    MIG135 Knurled Drive Roller (Key Way Style)

    Item #14113 Brand: Eastwood

    Knurled replacement for the original drive roller on our MIG 135 Welder

    Details

    This drive roller fits the Eastwood MIG135 Welder and is a knurled replacement for the original drive roller. This roller has one V groove side for 0.023 Inch (0.6mm) solid wire and one knurled side for 0.030 Inch (0.8mm) to 0.035 Inch (0.9mm) flux cored wire. This drive roller is for the Eastwood MIG135 with the Key Way style drive roller mount.

    About MIG135 Knurled Drive Roller (Key Way Style)

    This drive roller fits the Eastwood MIG135 Welder and is a knurled replacement for the original drive roller. This roller has one V groove side for 0.023Inch (0.6mm) solid wire and one knurled side for 0.030 Inch (0.8mm) to 0.035Inch (0.9mm) flux cored wire. This drive roller is for the Eastwood MIG135with the Key Way style drive roller mount.


    Contents

    Includes: 1 Knurled Drive roller for the MIG135 with key way style mount.


    FAQ's

    There are 4 different drive rollers for the Eastwood MIG135. 1. Standard replacment drive roller for the set screw style mount (13387). 2. Knurled drive roller for the set screw style mount (13790). 3. Standard replacement drive roller for the key way style mount (14112). 4. Knurled drive roller forthe key way style mount (14113).


    Safety

    Make sure welder is turned off and unplugged before attempting to install this drive roller.