• Home
  • Autotwirler Mustang Mounting Kit (PLUS Model)
Mustang Rotisserie Mounting Kit (PLUS Model) is rated 2.0 out of 5 by 1.
Rated 2 out of 5 by from Read Before Buying if you have a 68' Mustang If you have an Autotwirler Rotisserie with the stock brackets, you will not really need the front brackets since they are basically the same as the ones that come with the Autotwirler with the exception of a second hole drilled in it for frame rail mounting. The front ones bolt to the Bumper Support hole on the frame rail. Also they are not that long so there is not a lot of space between the core support and rotisserie, maybe 6 inches. The rear units bolt to the rear leaf spring shackle hole after you remove the rubber gromets. The big issue I had was the bolt is just long enough to secure it to the rear frame rail but it is to long to get in the hole because the distance between the trunk drop down and the frame is a bit shorter than the bolt on a 68' and if you try to get the bolt in from the other side it is even shorter. Plan on cutting the bolt down and only having a few threads sticking out to get the nut on. If I had to do this again I would build my own. These ones you can make work but they could have been better engineered.
Date published: 2016-09-03
  • y_2016, m_12, d_2, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_13913, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_eastwood

Autotwirler Mustang Mounting Kit (PLUS Model)

Item #13913

Mount '64-1/2 to '73 Mustang and
Ford uni-bodies on our PLUS


Mount your '64-1/2 to '73 Mustangs and Ford uni-bodies on our PLUS model RotisserieThese Mustang Mounting Brackets (PLUS model) bolt onto the rear leaf spring shackle mount and front bumper mounts on 1964-1/2 to 1973 Mustangs and most Ford uni-bodies. The brackets connect to the mounting arms provided with your Rotisserie ("Plus" model only).
  • Pre-welded rear leaf spring shackle mounts, pre-drilled front bumper mounts
  • Includes mounting bolts to attach to your car body
  • unfinished steel
  • Does NOT fit Standard or Pro Rotisserie models

More info...

About Autotwirler Mustang Mounting Kit (PLUS Model)

Pre-welded rear leaf spring shackle mounts, pre-drilled front bumper mounts. No welding or modifications required. 5-year mfr's. warranty on the steel. Made in the USA.

Fits our PLUS Rotisserie model only.


Restoration, welding, painting, abrasive blasting, soda blasting


12177 , 13656, 13657 Door Bars
12011, 12012, 12746 , 12740Welders
50095 Soda Blaster
12096 , 12097 Gel Rust Dissolver
51483z, 51676, 51677 Rust Converter
50544zp, http://www.eastwood.com/2k-ceramic-cb-gloss-and-activator.html 2K Ceramic Chassis Black


Always make sure the vehicle is secure and balanced when using your Rotisserie. Always wear eye, skin and respiratory protection. Read and understand the instruction manual before using, since serious vehicle damage or bodily injury could occur.

Customers also viewed: