- No Weld Hole Repair Kit
No Weld Hole Repair Kit
Item #13661 Brand: Eastwood
About No Weld Hole Repair Kit
The Eastwood No Weld Hole Repair Kit provides a quick, weld free solution to plugging 2 inch Dia. or less holes in steel, aluminum, fiberglass and plastic body panels while minimizing sanding damage and the amount of required surface preparation.
(2) 3in x 3in x 0.02in Flexible G10 fiberglass composite backer sheets, (2)3in long x 1/8in dia. Nylon retainer pins, (2) 3in x 5/8in Steel Retaining Clips, (2) Packets of Urethane Adhesive/filler
Wear protective gloves when cutting out damaged areas. Sharp edges can cause cuts. Wear protective gloves when trimming flexible fiberglass backing panels.Exposed glass fibers can cause cuts. Follow package directions carefully and wear disposable gloves when handling backer adhesive and use in a well ventilated area. The use of a NIOSH approved mask for respiratory protection is recommended. for use with exterior body panels only. Not intended for use in floor panels or structural areas.
Assembled in the USA of domestic and imported parts.
Customers also viewed:
1-step filler actually inhibits rust and self-etches, to save you timeOnly $59.99
Sands all types of flat and contoured surfaces; use wet or dry