• Home
  • No-Weld Panel Adhesive Replacement
No-Weld Panel Adhesive Replacement is rated 3.2 out of 5 by 5.
Rated 5 out of 5 by from great product, works perfectly I've used other matel adhesives such as 3M DuraMix before and this product did just as well for half that price. Did the rear wheel arches on my K1500 and used 1/2 a tube per arch. Thank you to the guy who broke the "ears" off of his tube, gotta cut a large enough hole on in the appliacation tip and hold the caulk gun to make sure you dont break anything. lay a thick enough bead just so that the bead squeezes out of the top of the repair once you squeeze it together with your pop rivets(what I did) or sheet metal screws.
Date published: 2013-10-02
Rated 4 out of 5 by from Positive, need to add a tip 1.) The actual product is probably very good. 2.) Cut the nozzle tip larger than you want, the caulking gun exerts more force than you realize, and can break the ears of the tip off. 3.) Place a 1/2" flat washer over the nozzle tip before you insert it in the adapter to hold the nozzle and the cartridge better. Very important. 4.) You will need more of these than you think you will.
Date published: 2010-10-04
Rated 3 out of 5 by from good product My friend (in another state) has all the bodywork equipment in the world, and said I could borrow his "gun" any time I needed to use a 3M type of epoxy adhesive. When I saw that Eastwood had a set-up that used my standard caulk gun, that sounded like a better idea!! I had read the reviews about the hole needing to be bigger so I proceeded with caution, but still started with a smaller hole. I thought that you got more in a tube, and that it would go further!!! For my situation I didn't want/need a 1/4' bead, so I put the tube out in the sun for half an hour or so before I brought it in the garage and cut a SMALL hole in the tip. This seemed to be the ticket!!!! If you warm the product up a little first...it comes out great!!!! HOPE THIS HELPS ANY OF YOU AFRAID TO BUY THIS PRODUCT!!! I attached a 4" x 66'' piece of aluminum diamond plate to my tailgate, and had PLENTY of adhesive, where I was afraid that one 1/4' bead appx. 6' long as the product coverage states wouldn't be enough. Thanks, Eastwood!!!
Date published: 2014-06-09
Rated 1 out of 5 by from Horrible product. Didn't work at all Bought this to adhere 2 rear panels together. The adhesive never set and I had to end up welding the panels together. It was a mess! My recommendation is to NOT buy this product.
Date published: 2015-02-17
Rated 3 out of 5 by from Great to use regular caulking gun. Cleaver Idea I thought the tubes would be larger, seemed expensive for what you get. You ask if I would recommend to a friend. I'm not sure. I think I would look around for other epoxy's.
Date published: 2015-01-29
  • 2015-04-18T08:48CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_31087, PRD, sort_relevancy
  • clientName_eastwood

No-Weld Panel Adhesive Replacement

Item #31087 Brand: Eastwood

Slow-cure epoxy adhesive works
with our No-Weld Repair Kit 31102

Details

Replacement Adhesive for our No-Weld Panel Repair Kit Slow-cure epoxy adhesive works with our 31102 No-Weld Panel Repair Kit to securely install metal repair panels without welding.
  • 50ml cartridge
  • Includes 2 mixing nozzles
  • Each cartridge produces a 6'-long, 1/4"-wide bead

More info...

About No-Weld Panel Adhesive Replacement

Use your own caulking gun. Flat repair surface will require little or no filler.


Contents

Slow-Cure Epoxy Adhesive Cartridge, 50ml
2 Mixing Nozzles


MSDS Sheet

Click Here for Material Safety Data Sheet


Accessories

31102 No-Weld Panel Repair Kit


Customers also viewed: