• Home
  • Pearl Necklace Gallon w/Activator Kit

Pearl Necklace Gallon w/Activator Kit

Item #14299ZP

Premium acrylic urethane topcoat for exceptional long-lasting beauty

Details

EW Pearl Necklace White is a premium acrylic urethane topcoat that provides exceptional long lasting beauty and durability. This premium two component system is blended with top quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings, a catalyzed urethane system offers unsurpassed durability and resistance to UV exposure, chemicals and stone chips. MUST BE APPLIED OVER PURE WHITE TO ACHIEVE PEARL . Includes 50284ZP 96 Fl. Oz 3:1 Single stage topcoat and 21856ZP 32oz activator.

About Pearl Necklace Gallon w/Activator Kit

EW Pearl Necklace White is a premium acrylic urethane topcoat that provides exceptional long lasting beauty and durability. This premium two component system is blended with top quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings, a catalyzed urethane system offers unsurpassed durability and resistance to UV exposure, chemicals and stone chips. MUST BE APPLIED OVER PURE WHITE TO ACHIVE PEARL . Includes 50284ZP 96 Fl. Oz 3:1 Single stage topcoat and 21856ZP 32oz activator.


Contents

96 ounces of Pearlnecklace, 32 ounces of activator


Accessories

50212 ZP Pure White SSU 50250 ZP Urethane Clear and 50251 ZP Activator, 50240 ZP Urethane primer and 50241 ZP Activator, 50040ZP THRU 50042ZP PAINT PREP KITS, 12454Z Block sanding kit, 20472 Air management system 12776 Evolution HVLP Gun


Safety

Always wear appropriate eye, skin and breathing protection. Consult Product Information Sheet 50200INST and MSDS for specific safety instructions


Warranty

Made in USA


Application

Clean surfaces of all contaminents. Abrade surface to be painted with a minimum of 320 grit sandpaper working up to a 600 grit for maximum adhesions. Reclean surface. After shaking paint, mix 3 parts paint with 1 part activator. Use caution mixing materials as paint may begin to gel after 2 hours at 70. HVLP gun setting 8 to 10psi 1.4 to 1.8mm tip. Eastwood paint is designed to give complete coverage in 2 coats. Allow 10 minutes flash time between coats, should be tack free in 45 to 60 minutes, full cure in 18 hours


Customers also viewed: