• Home
  • Eastwood Tubing and Pipe Notcher holds up to 2"-dia round tubing
Eastwood Tubing and Pipe Notcher holds up to 2"-dia round tubing is rated 3.0 out of 5 by 9.
Rated 3 out of 5 by from I expected Better Quality From Eastwood Upon initial setup of the jig I found the center-line of the pipe clamp was not aligned with teh center-line of the drill shaft. The unit required significant shimming of the pipe clamp assembly in order to make acceptable cuts. The drill shaft guide block could also have been machined down to make this adjustment as well, once the initial offset between the two was determined. I really expected that Eastwood would provide a more accurate tool out of the box.
Date published: 2013-05-27
Rated 3 out of 5 by from Your better off getting a JD Square notcher The main thing I noticed once I used the Eastwood notcher is that the guide for the blade is not steady. There is no bearing or stability and has play In the shaft, so u get a cut that is slightly off.
Date published: 2012-07-07
Rated 1 out of 5 by from Doesn't do the job it's suppose to... This unit would be ok if it actually worked... Even though it says you can cut pipe up to 60 degrees, you can NOT. Even on only 1/2" pipe you can not cut past 30%. The design is a joke. If you try to go past 30 degrees even on 1/2" pipe, it hits hold saw and you can not notch pipe. To ad insult to injury, it looked like old stock that had been kept on the self for the past 15 years. I like Eastwood, yet they really dropped the ball on this one!
Date published: 2011-04-17
Rated 3 out of 5 by from not a bad buy i bought this notcher and the first time i used it the adapter stripped out... bummer, so i called eastwood and they sent me a replacement in an orderly fashion and have had minimal issues since. not a bad tool, i actually solid welded mine in the position i will be using it most and put it on my welding table. very happy with this tool. thank you eastwood for your customer service in standing behind your product. not very many like that anymore.
Date published: 2011-10-25
Rated 4 out of 5 by from Perfect for the money... I have built several mini chopper frames using this notcher without any problems at all.I have also used it for some railings and other projects for a local buisness and i havent had any trouble at all..A little common sense can go a long way..
Date published: 2012-02-02
Rated 3 out of 5 by from OK For the money, this is a nice addition to the shop...The problem was with the manufacturing of the product. When putting the thing together, parts didnt fit as they should have...MASS PRODUCED,,,had to fab a tab to make the upright parts fit the base. After i spent a good 1.5 hours, the product was Ok... NOW its on sale! of course I paid full price a couple weeks ago...
Date published: 2010-08-14
Rated 5 out of 5 by from the product is great. the product was everything you could ask for. I expected another 10% off of the price because I enrolled to have the Emails, but I didn't receive the extra % off of the price and tried to get someone to explain why and it went on deaf ears. Like I said the product is great, but the service and the advertising is terrible. Bob
Date published: 2014-11-14
Rated 4 out of 5 by from easy to use worked great for my project. for the money its a great value and you could not make it for what it costs by the time you add your time and matirerials. great product.
Date published: 2015-01-18
  • 2015-03-30T11:08CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_US, sid_21749, PRD, sort_relevancy
  • clientName_eastwood

Can this notcher do square/rectangular tube?

Asked by: BillT
This notcher will handle up to a 2" x 2-1/2" rectangular tube.
Answered by: NickC
Date published: 2014-11-10
  • 2015-03-30T11:26CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_21749, PRD, sort_recentAnswersFirst
  • clientName_eastwood

Eastwood Tubing and Pipe Notcher holds up to 2"-dia round tubing

Item #21749 Brand: Eastwood

Bore up to a 2" hole in mild steel, stainless, alum. tubing; no hole saws


Pipe & Tubing Notcher secures up to 2"-dia. round tubing to notch angles of up to 60 degrees Use our Pipe Notcher with any handheld drill or drill press to notch pipes and tubing for easy joining. Create any angle saddle notch on pipe for weld fit-up.
  • Use a standard hole saw up to 2-1/2" in dia. (not included)
  • Notches up to a 2"-dia. round tube
  • Notches up to a 2" x 2-1/2" rectangular tube

More info...

About Eastwood Tubing and Pipe Notcher holds up to 2"-dia round tubing

The Pipe/Tubing Notcher can be used with any hand-held drill or drill press, together with a standard hole saw (not included) up to 2-1/2" diameter. Compound angle adjustment up to 60 degree.Color may vary.


28003 5-Pc. Hole Saw Set
20178 Tubing Notcher Adapter


Click here for Tubing Notcher instructions

Customers also viewed: